Need help?Do you have a question about the JBL Cinema Sound CSS10 and is the answer not in the manual?
Detailed technical specifications for the CSS10 amplifier and subwoofer.
How to connect the subwoofer using Dolby Digital or DTS surround sound.
How to connect the subwoofer using Dolby Pro Logic or analog line level.
How to adjust the subwoofer's sound level using the volume control.
How to adjust the phase switch for optimal bass response.
Steps to diagnose and resolve problems with no sound output from speakers.
Troubleshooting steps for low or no bass output from the subwoofer.
Diagnosing why the system shuts off or has volume problems.
Procedure for testing the basic functionality of the unit.
Procedures for testing the unit's sweep response and driver performance.
List of components for the Preamp Printed Circuit Board.
List of capacitor parts used in the unit.
List of semiconductor parts including transistors and diodes.
List of various other parts, including wires and connectors.
List of parts for the Class D Printed Circuit Board assembly.
List of resistor parts used in the unit.
List of mechanical parts such as screws, knobs, and gaskets.
Schematic diagram for the CSS10 preamplifier section.
Schematic diagram for the CSS10 120V power amplifier section.
Schematic diagram for the Class-D power amplifier.
To Next Page
General
