Need help?Do you have a question about the JBL Synthesis S7150 and is the answer not in the manual?
Key safety guidelines for using audio products, covering installation, environment, and operation.
Welcome message and overview of the JBL Synthesis S7150 power amplifier's capabilities.
Details compliance with Lucasfilm THX Ultra standards for advanced audio performance.
Explains the amplifier's design for multi-channel audio and immersive home theater sound.
Highlights the amplifier's 160W per channel output and wide dynamic range for realistic audio.
Describes automatic power management features when integrated into a JBL Synthesis System.
Explains the temperature-sensitive fan system for optimal cooling and minimal operational noise.
Details the amplifier's channel-specific protective circuits and their unique optical coupling.
Details the front panel controls, indicators, and rear panel connection ports of the S7150.
Explains the rear panel main power switch function and its circuit breaker protection.
Describes the rear panel switch for controlling automatic or manual power-on modes.
Details the use of DIN jacks for system control signals in a JBL Synthesis System.
Explains connectors for switching speakers between Music and Cinema audio modes.
Information regarding the power cord connection and voltage requirements for the amplifier.
Overview of connecting the S7150 within a JBL Synthesis System, emphasizing power and control settings.
Provides a recommended rack mounting configuration for Synthesis Two and Three systems.
Illustrates control signal wiring between system components like SDP-3, SDEC-2500A, S7150, and S800.
Shows the audio and control signal flow between various JBL Synthesis components.
Provides guidance on mounting the amplifier in racks or stacks and ensuring proper ventilation.
Addresses issues where the amplifier fails to power on, checking connections and switches.
Troubleshoots when the amplifier is in standby but not operating, checking system integration.
Helps diagnose sound issues when the amplifier is powered on but no audio is output.
Solves problems with multiple amplifiers not activating simultaneously in a system.
Deals with low audio output levels, checking source and equalizer settings.
Addresses bass response issues, often related to speaker wiring polarity.
Troubleshoots mode switching failures for front speakers, checking wiring and system connections.
Provides solutions for unwanted noise or hum from the speakers.
Defines who is covered under the JBL warranty terms and what aspects are included or excluded.
Provides instructions on how to get warranty service and the necessary documentation.
Explains the cost responsibilities for warranty repairs, examinations, and shipping.
States limitations on implied warranties of merchantability and fitness for particular purpose.
Outlines the exclusion of incidental or consequential commercial damages.
To Next Page
General
