To Next PageTo Next Page
Need help?Do you have a question about the JBL Stage A3001 and is the answer not in the manual?
General| Fuse | 15 A |
|---|---|
| Bass boost | 0 - 12 dB |
| Amplifier class | D |
| Frequency range | 10 - 320000 Hz |
| Low pass filter | Yes |
| Signal-to-Noise Ratio (SNR) | 75 dB |
| Number of amplifier channels | - channels |
| Total Harmonic Distortion (THD) | 1 % |
| RMS power output per channel (2 Ohm) | 300 W |
| DC input voltage | 9 - 16 V |
| Product color | Black |
Weight and Dimensions| Depth | 241.6 mm |
|---|---|
| Width | 145 mm |
| Height | 50 mm |
| Weight | 1609 g |
Instructions for connecting the main power wire from the battery to the amplifier.
How to connect speakers, including polarity and bridging configurations.
Explains how to adjust input sensitivity to match the source unit's output.
How to select low-pass, full-range, or high-pass filters for optimal sound.
How to adjust crossover frequency points for desired audio response.
Step-by-step guide to setting input sensitivity (gain) correctly for optimal performance.
Guide to setting crossover filters (LPF, FULL, HPF) and frequency points.
