Need help?Do you have a question about the JBL GX-A3001 and is the answer not in the manual?
Connects amplifier GND to vehicle chassis for proper grounding.
Details wiring the +12V terminal from the battery with fuse protection.
Connects the amplifier using speaker outputs from the source unit.
Connects speakers to FL and FR terminals for 2-channel mode.
Connects source unit line outputs to amplifier inputs for 2-channel mode.
Connects a subwoofer to RL(+) and RR(-) terminals for high-power output.
Connects source unit subwoofer output to amplifier's left input for bridged mode.
Addresses no sound problems based on Power/Protection LED status.
Covers partial sound, quiet sound, and distorted sound problems.
Technical performance and physical details for the GX-A602 model.
General| Amplifier class | - |
|---|---|
| Frequency range | 10 - 320 Hz |
| Audio output channels | 1.0 channels |
| Peak power per channel | 415 W |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| Total Harmonic Distortion (THD) | - % |
| RMS power output per channel (2 Ohm) | 300 W |
| RMS power output per channel (4 Ohm) | 200 W |
| DC-in jack | Yes |
| Line inputs (RCA) | 2 |
| Speakers connectivity type | RCA |
| Product color | Black |
Weight and Dimensions| Depth | 52 mm |
|---|---|
| Width | 206 mm |
| Height | 291 mm |
To Next Page
