JBL Ti6K - User Manual

Technical
Manual
TOK
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
* Nominal Impedance:
Frequency Response:
Sensitivity:
Crossover frequency:
SYSTEM COMPONENTS:
* Cabinet
* Grille:
* Woofer
* He He
DC Resistance:
* Midrange
DC Resistance:
PACKAGE
End Pad (1)
9832190 \
Recommended Amp Power:
6 ohm
10-300 W
50 Hz — 22 kHz (+ 2dB)
90 dB / 2,8V / 1m
400/3,5 KHZ
CTI-6K (Not for sale)
GTi-6K (2404280)
806J 180mm (2)
51mm voice coil
10 ohm
804Tl 125mm
40mm voice coil
4,1 ohm
End Pod (1)
Cloth(4) Foam (1)
Se 1855 9860270
Vv
SYSTEM COMPONENTS: (cont'd)
* Tweeter Ti25K
DC Resistance: 3,8 ohm
* Crossover Network: NTi6K (2704280)
PHYSICAL SPECIFICATIONS:
* Enclosure Dimensions (H.W.D): 39,4x14,3x21,0 In. D
(1000x363x533mm_D)
* Shipping Weight: 79 Ibs. (36 kg.)
WARRANTY INFORMATION:
* Refer to the Warranty Statement packed with each product
SCHEMATIC
TI025K
L3 C3
0,27MH 100UF SW
806JB30
NOTE: CONE/DIAPHRAGM KIT NOT AVAILABLE.
DEFECTIVE DRIVER SHOULD BE REPLACED.
Valid from serial no. 00001
Rev. 10/8-1999
TiOK

JBL Ti6K Specifications