Do you have a question about the JBL TLX105 and is the answer not in the manual?
frequency response | 75Hz – 20kHz |
---|---|
normal impedance | 8 ohms |
recommended maximum power handling | 50 watts |
---|---|
sensitivity @ 1 watt/1 meter | 86dB |
woofer | 5-1/4" |
---|---|
midrange | N/A |
tweeter | 2" |
dimensions (HxWxD) | 11 x 6-1/2 x 7-1/4" / 280 x 165 x 184mm |
---|---|
weight | 7 lbs / 3.2 kg |
finish | black ash woodgrain vinyl |
frequency response | 55Hz – 25kHz |
---|---|
normal impedance | 8 ohms |
recommended maximum power handling | 75 watts |
---|---|
sensitivity @ 1 watt/1 meter | 89dB |
woofer | 6-1/2" |
---|---|
midrange | N/A |
tweeter | 10mm titanium laminate |
dimensions (HxWxD) | 13-3/4 x 7-7/8 x 9-5/8" / 350 x 200 x 245mm |
---|---|
weight | 10.5 lbs / 4.8 kg |
finish | black ash woodgrain vinyl |
frequency response | 50Hz – 25kHz |
---|---|
normal impedance | 8 ohms |
recommended maximum power handling | 125 watts |
---|---|
sensitivity @ 1 watt/1 meter | 90dB |
woofer | 8" |
---|---|
midrange | 4" |
tweeter | 10mm titanium laminate |
dimensions (HxWxD) | 20-7/8 x 9-7/8 x 12" / 530 x 250 x 305mm |
---|---|
weight | 21.25 lbs / 9.5 kg |
finish | black ash woodgrain vinyl |
frequency response | 35Hz – 25kHz |
---|---|
normal impedance | 8 ohms |
recommended maximum power handling | 150 watts |
---|---|
sensitivity @ 1 watt/1 meter | 90dB |
woofer | 8" |
---|---|
midrange | 4" cast frame |
tweeter | 10mm titanium laminate |
dimensions (HxWxD) | 33-7/8 x 10-1/4 x 12-7/16" / 860 x 260 x 315mm |
---|---|
weight | 35.25 lbs / 16 kg |
finish | black ash woodgrain vinyl |
frequency response | 30Hz – 25kHz |
---|---|
normal impedance | 8 ohms |
recommended maximum power handling | 200 watts |
---|---|
sensitivity @ 1 watt/1 meter | 90dB |
woofer | 10" with 10" passive radiator |
---|---|
midrange | 4" frame |
tweeter | 10mm titanium laminate |
dimensions (HxWxD) | 37-3/8 x 11-3/4 x 12-7/16" / 950 x 300 x 315mm |
---|---|
weight | 43 lbs / 19.5 kg |
finish | black ash woodgrain vinyl |
Ensure tweeters are positioned at ear level for optimal sound projection.
Connect speaker terminals identically to amplifier terminals (+ to +, - to -) to avoid phase issues.
Verify receiver/amplifier is on, source is playing, and review unit operation.
Check balance control, all wire connections, and speaker wire integrity.
Check connections, wire condition, and ensure minimum impedance requirements are met.
Confirm correct polarity (+ and -) for left and right speaker inputs.
Frequency Response: 75Hz-20kHz, Power Handling: 50W, Impedance: 8 ohms.
Frequency Response: 55Hz-25kHz, Power Handling: 75W, Impedance: 8 ohms.
Frequency Response: 50Hz-25kHz, Power Handling: 125W, Impedance: 8 ohms.
Frequency Response: 35Hz-25kHz, Power Handling: 150W, Impedance: 8 ohms.
Frequency Response: 30Hz-25kHz, Power Handling: 200W, Impedance: 8 ohms.