JBL TR225 - User Manual

JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.
JBL TR225 REV N
PACKAGE WIRING DIAGRAM
11-07
Technical Manual
JBL TR225
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance: 4 ohm
• Power Capacity: Continuous Pink Noise: 450W
Peak Pink Noise: 1800W
• Frequency Range: 50 Hz to 16 kHz (–10dB)
• Sensitivity: 102 dB SPL*
• Crossover Frequencies: 750 Hz – 1.3 kHz
SYSTEM COMPONENTS:
• Cabinet: CTR225
• Grille: GTR225 (128-00093-60)
• Low Frequency 380mm (15 in.) Cone
Transducer: Transducer (124-67001-00X) (2)
• DC Resistance: 5.1 ohm
• High Frequency 25.4mm (1 in.) Pure Titanium
Transducer: Compression Driver 2412H
(125-10000-00X)
*1 Watt (2.83 V RMS) @ 1 Meter
SYSTEM COMPONENTS: (cont’d)
• DC Resistance: 3.7 ohm
• Crossover Network: (330728-001)
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test: 7.0V Input, 20 Hz to 20 kHz
B. L.F. Aural Sweep Test: 7.0V Input, 20 Hz to 1.2 kHz
C. H.F. Aural Sweep Test: 2.83V Input, 550 Hz to 20 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 1145mm x 460mm x 370mm D
(45.0 x 18.0 x 14.5 in. D)
• Shipping Weight: 94 lbs. (42.7 kg.)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
Warranty 59660
Owner’s Manual 981-00020-00
Under Pad
Filler (2)
991-00172-01
Microfoam (2)
49790P
Carton
991-00196-01
(as of 6/21/00)
Speaker, High Freq
2412H
(125-10000-00X)
Network
(330728-001)
SCHEMATIC (330728-001)
Speaker,
Low Freq
124-67001-00X
YEL/BLK
YEL
GRN
WHT
GRN/BLK
WHT/BLK
YEL
WHT
GRN
LP1 LP2
L3
0.18mH
L2
0.68mH
L1
1.5mH
R1
16
10W
C2
.01µF
C1
4µF
H.F.
2412H
L.F.
124-67001-00X
L.F.
124-67001-00X
BLK
BLK
RED
RED
GRN/BLK
WHT/BLK
J! JACK
1/4 IN.
63394
J2 JACK
1/4 IN.
YEL/BLK
NOTE: CONE/DIAPHRAGM KIT NOT AVAILABLE. DEFECTIVE SPEAKER
SHOULD BE REPLACED.
SK3
40-0174-0000

Summary

JBL TR225 Product Specifications

Acoustic and Electrical Specifications

Details impedance, power capacity, frequency range, sensitivity, and crossover points.

System Components

Lists cabinet, grille, low frequency transducer, DC resistance, and high frequency transducer.

System Components (Continued)

Lists DC resistance for crossover network and the crossover network part number.

Aural Sweep Test Specifications

Specifies test conditions including voltage input and frequency ranges for system, LF, and HF tests.

Physical Specifications

Provides enclosure dimensions and shipping weight for the product.

Warranty Information

Directs users to the warranty statement included with the product.

Wiring Diagram

Illustrates the electrical connections for the speaker components and network.

JBL TR225 Component Exploded View

Component Identification

Lists and identifies individual parts of the speaker system with part numbers and quantities.

Assembly Notes

Provides specific instructions for assembling certain components like handles.

JBL TR225 Specifications

General

Brand	JBL
Model	TR225
Category	Speakers
Language	English