Need help?Do you have a question about the JBL TOUR PRO+TWS and is the answer not in the manual?
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Bluetooth Version | 5.0 |
| Charging Time | 2 hours |
| Water Resistance | IPX4 |
| Active Noise Cancellation | Yes |
| Type | True Wireless |
| Impedance | 16 ohms |
| Sensitivity | 100 dB SPL@1 kHz |
| Bluetooth Profiles | A2DP V1.3, AVRCP V1.6, HFP V1.7 |
| Music Playtime with BT and ANC on | Up to 6 hours |
| Music Playtime with BT only | Up to 8 hours |
| Weight (Case) | 56.8 g |
| Noise Cancellation | Yes |
| Codecs | SBC, AAC |
| Driver Size | 6.8 mm |
| Battery Life (Earbuds) | 8 hours |
| Battery Life (Case) | 24 hours |
| Bluetooth Frequency | 2.4 GHz - 2.4835 GHz |
| Microphone | Yes |
| Microphone Sensitivity | -38 dBV/Pa@1 kHz |
Optimize audio performance and comfort by selecting the correct ear tip size and fit.
Instructions for connecting headphones to devices other than Android 6.0+ via Bluetooth settings.
Steps for connecting to Android 6.0+ devices using Fast Pair for seamless integration.
Utilize both earbuds simultaneously for an immersive stereo audio experience.
Use a single earbud for mono audio, allowing for ambient awareness.
Activate TalkThru to hear surroundings and conversations without removing earbuds.
Access Bixby, Siri, or other voice assistants using earbud controls.
Configure and activate your preferred voice assistant via the My JBL Headphones app.
Engage Silent Now mode to effectively block out ambient noise for focused listening.
Disengage Silent Now mode to allow ambient sounds to pass through.
Manually connect the headphones to a Bluetooth device for audio playback.
Steps to reset the headphones to factory default settings to resolve issues.
Information regarding head exposure compliance with RF safety standards and antenna usage.
To Next Page
