Need help?Do you have a question about the JBL VRX932LAP and is the answer not in the manual?
General| Frequency Response | 57 Hz - 20 kHz |
|---|---|
| Coverage Pattern | 100° x 15° nominal |
| Maximum SPL Output | 136 dB |
| LF Driver | 1 x JBL 2262FF 305 mm (12 in) Differential Drive woofer with neodymium magnet |
| HF Driver | 3 x JBL 2408J, 38 mm (1.5 in) voice-coil compression driver |
| Dimensions | 597 mm |
| Type | Powered loudspeaker |
| Amplifier | Crown Class D |
| Input Connectors | XLR with loop through |
| Suspension | Integral rigging hardware for simple connection of enclosures |
| System Processing | DSP-based |
Caution regarding prolonged exposure to sound pressure levels (SPL) that can cause permanent hearing damage.
Details on the VRX932LAP input panel controls like Attenuation, Level, and indicators like Peak and Power.
Details on the VRX918SP input panel controls like Xover Selector, Attenuation, and indicators like SIG and POWER.
Adjusts array coverage and frequency response via settings like -3dB, 0dB, +3dB for optimized sound distribution.
Essential safety precautions for mounting loudspeakers on stands or poles to prevent tipping and damage.
To Next Page
