To Next PageTo Next Page
Need help?Do you have a question about the JBL VRX932LA and is the answer not in the manual?
General| Power Rating | 800 W Continuous, 3200 W Peak |
|---|---|
| Sensitivity | 95 dB SPL (1w @ 1m) |
| Nominal Impedance | 8 Ohms |
| Crossover Frequency | 1.2 kHz |
| Finish | Black DuraFlex finish |
| Crossover Modes | Bi-amp / Passive |
| Suspension | Integral rigging hardware for simple connection of enclosures and optional array frame |
| Input Connectors | Neutrik Speakon |
| Dimensions | 597 mm |
| Frequency Response | 57 Hz - 20 kHz (+/- 3dB) |
| Coverage Pattern | 100° x 15° nominal |
| LF Driver | 1 x 12" Differential Drive woofer |
| HF Driver | 3 x 1.5" annular ring diaphragm compression drivers |
Provides specific tuning parameters for the dbx DriveRack 260 processor.
Crucial safety precautions for using speaker stands and poles.
Guidelines for inspecting and maintaining rigging components.
Requirements for attaching systems to structures, involving professional engineers.
Defines maximum speaker suspension limits for the VRX-AF frame.
Defines maximum speaker suspension limits for the VRX932LA-AF frame.
Details maximum speaker suspension limits using M10 eyebolts.
