JBL VTX Series - Page 12

12
c
Crown Audio VRack 4x3500HD:
Unlike the VRack 12000HD, due to its high channel density, the Crown Audio VRack 4x3500HD does not contain a
speaker output panel and all connecons are made directly to the amplier's NL4 and NL8 connectors. As seen above,
to implement parallel mode wiring on IT-4x3500HD ampliers, a pair of LK VTX-NL-424 adapters can be used in con-
juncon with 2 x NL4 cables that are directly connected to the amplier’s NL4 outputs. Alternavely, a single NL8 cable
can be used in conjuncon with LK VTX-NL-844. Therefore, one VRack4x3500HD is able to power 12x VTX subwoofers
with either: 6x NL4 + 6x VTX-NL-424 adapters or 3x NL8 + 3x VTX-NL-844 adapters
Rear Front
Example: 6x VTX V20, 3x VTX S25, 1x VT4886 powered by 1x V-Rack 4x3500HD