jcb 8030 ZTS User Manual

THIS MANUAL SHOULD ALWAYS STAY WITH THE MACHINE
8026 CTS, 8025 ZTS, 8030 ZTS, 8035 ZTS
Copyright © 2004 JCB SERVICE.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any other means, electronic, mechanical,
photocopying or otherwise, without prior permission from JCB SERVICE.
A5-3-MiniMidi - Printed In England
Dear JCB Customer
Even if you have operated this type of equipment before,
it is very important that your new machines operations and
functions are explained to you by a JCB Dealer
Representative following delivery of your new machine.
Following the installation you will know how to gain
maximum productivity and performance from your new
product.
Please contact your local JCB dealer if the Installation
Form has not yet been completed with you.
Your Local JCB Dealer is:
ENGLISH - 9811/9950 - ISSUE 1 - JANUARY 2011
OPERATOR MANUAL
HE Services

jcb 8030 ZTS Specifications

General

Engine Power	20.9 kW
Transport Width	1.55 m
Transport Height	2.45 m
Operating Weight	3217 kg
Dig Depth	3.07 m
Transport Length	4.34 m

Summary

Safety Notices

Important Information

General guidance on operating the machine safely and understanding warnings.

Safety Warnings and Symbols

Explanation of danger, warning, and caution symbols and their meanings.

Introduction

Operator Safety Procedures

Covers safety checks, general safety, operating safety, and maintenance safety.

Operation

Before Entering the Cab

Cab Controls and Instruments

Driving and Machine Movement

Instructions on operating drive controls, moving the machine, turning, and spinning.

Excavator and Dozer Controls

Explanation of excavator and dozer lever operation, including ISO/SAE patterns.

Safety Equipment Operation

Starting and Warming Up the Engine

Procedures for safely starting, warming up the engine, and immobiliser system operation.

Working Practices and Site Safety

Lifting and Load Handling

Routine Maintenance

Service Requirements and Schedules

Health, Safety, and Lubricants

Engine Maintenance

Procedures for checking oil levels, changing oil and filter, and cooling system checks.

Fuel System Maintenance

Procedures for draining and replacing fuel filters, and bleeding the fuel system.

Hydraulic System Maintenance

Guidance on hydraulic oil level checks, releasing pressure, and replacing hydraulic filters.

Tracks and Running Gear Maintenance

Specifications

Lifting Regulations and Safe Working Loads