Operation
Starting
Once the machine has been correctly setup with both Pre-Operation checks, the machine can be started. This will
start the machine.
WARNING ! – YOU MUST READ AND UNDERSTAND THE WHOLE USER MANUAL BEFORE
OPERATING THIS MACHINE
*NOTE*- IF your machine doesn’t have a Throttle Lever, it will have an automatically controlled throttle
> Move the fuel valve lever to the ON position
> To start a cold engine, move the choke lever to the CLOSED position. To restart a warm engine, leave the
choke lever in the OPEN position.
> Move the throttle lever away from the SLOW position about 1/3 of the way toward the FAST position.
JCB-E460P
Instruction & User Manual
13
Throttle Lever
Fuel Valve Lever
Choke Lever
To Next Page
Loading...
