9
JCB-MS-254SB-L
Instruction & User Manual
Protect yourself and your environment
from accidents using suitable
precautionary measures!
• Do not look directly into the laser beam with
unprotected eyes.
• Never look into the path of the beam.
• Never point the laser beam towards
reflecting surfaces and persons or animals.
Even a laser beam with a low output can
cause damage to the eyes.
• Caution - methods other than those specified
here can result in dangerous radiation
exposure.
• Never open the laser module. Unexpected
exposure to the beam can occur.
• If the mitre saw is not used for an extended
period of time, the batteries should be
removed.
• The laser may not be replaced with a
different type of laser.
• Repairs of the laser may only be carried out
by the laser manufacturer or an authorised
representative
.
Attention: Laser radiation
Do not stare into the beam
Class 2 laser
EN 60825-1:2014
P ≤ 1mW
y = 650nm
To Next Page
Loading...
