1 - 1
Up to machine no. 677000
Auxiliary Pump - Standard
Type
Displacement
Maximum Working Pressure
Maximum Speed
Maximum Input Torque
Auxiliary Pump - High-Flow
Type
Displacement - Front Section
Displacement - Rear Section
Maximum Working Pressure
Maximum Speed
Maximum Input Torque
Main Pump (2-off) up to machine no. 676354
Type
Displacement
Control
Maximum Working Pressure
Maximum Speed
Maximum Input Torque
Charge Pressure (oil temperature at 50° C)
Main Pump (2-off) from machine no. 676355
Type
Displacement
Control
Maximum Working Pressure
Maximum Speed
Charge Pressure (oil temperature at 50° C)
Loader & Transmission Joysticks
Output Characteristics - all 4 positions
Hydraulic Motors up to machine no. 676354
Type
Displacement
Maximum Working Pressure
Maximum Speed
Maximum Flow
Hydraulic Motors from machine no. 676355
Type
Displacement
Maximum Working Pressure
Maximum Speed
Maximum Flow
Gear type
48 l/min (10.5 UK gal, 12.7 US gal/min) at 3000 rev/min
185 - 192 bar (2683 - 2785 lbf/in
2
, 188 - 196 kgf/cm
2
)
3200 rev/min
121 Nm (89 lbf ft, 12 kgf m)
Dual gear type
57 l/min (12.5 UK gal, 15 US gal/min) at 3600 rev/min
90 l/min (19.8 UK gal, 23.8 US gal/min) at 3600 rev/min
185 - 192 bar (2683 - 2785 lbf/in
2
, 188 - 196 kgf/cm
2
)
3600 rev/min
121 Nm (89 lbf ft, 12 kgf m)
Tandem axial piston Series 40 M35
35 cc/rev (2.13 in
3
/rev)
Servo non-feedback proportional, 18 bar (261 lbf/in
2
) to give max
pump displacement.
280 bar (4060 lbf/in
2
)
3600 rev/min
121 Nm (89 lbf ft, 12 kgf m)
6 bar (87 lbf/in
2
) at engine idle; 18 bar (261 lbf/in
2
) at 3000 rev/min
Tandem axial piston Series 42 M28
28 cc/rev (1.71 in
3
/rev)
Servo non-feedback proportional, 15 bar (218 lbf/in
2
) to give max
pump displacement.
350 bar (5076 lbf/in
2
)
3900 rev/min
7.5 bar (109 lbf/in
2
) at engine idle; 19.5 bar (283 lbf/in
2
) at 3000 rev/min
3.3 to 3.7 bar (48 to 53 lbf/in
2
) at 15% stroke.
14.5 to 16.5 bar (210 to 234 lbf/in
2
) at 95% stroke.
OMT 400 FX axial piston
410.9 cc/rev (25 in
3
/rev)
280 bar (4061 lbf/in
2
) continuous
306 rev/min continuous
125 l/min (27.5 gal/min, 33 US gal/min) continuous
MCR03 axial piston
328 cc/rev (20 in
3
/rev)
414 bar (6000 lbf/in
2
) continuous
237 rev/min continuous
84 l/min (18.5 gal/min, 24 US gal/min) continuous
Section E
Hydraulics
9803/8500
Section E
1 - 1
Issue 8*
Technical Data
Note: System Cleanliness is to be to ISO 16/13 - See page E/2 - 0 for guidance.
*
*
*
*
*
*
*
To Next Page
Loading...
