jcb ROBOT 150 - Page 137

1 - 7
From machine no. 678000
Auxiliary Pump - Standard
Type
Displacement
Maximum Working Pressure
Maximum Speed
Auxiliary Pump - High-Flow
Type
Displacement - Front Section
Displacement - Rear Section
Maximum Working Pressure
Maximum Speed
Main Pump (2-off) - Servo Machines
Type
Displacement
Control
Maximum Working Pressure
Maximum Speed
Charge Pressure (oil temperature at 50° C)
Main Pump (2-off) - Manual Machines
Type
Displacement
Control
Maximum Working Pressure
Maximum Speed
Charge Pressure (oil temperature at 50° C)
Servo Joysticks
Maximum Working Pressure
Output Characteristics - Transmission control spools
Output Characteristics - Loader control spools
Hydraulic Motors - Servo Machines
Type
Displacement
Maximum Working Pressure
Maximum Speed
Maximum Flow
Hydraulic Motors - Manual Machines
Type
Displacement
Maximum Working Pressure
Maximum Speed
Maximum Flow
Gear type
54 l/min (11.9 UK gal, 14.2 US gal/min) at 3000 rev/min
185 - 192 bar (2683 - 2785 lbf/in
2
, 188 - 196 kgf/cm
2
)
3200 rev/min
Dual gear type
54 l/min (11.9 UK gal, 14.2 US gal/min) at 3000 rev/min
106 l/min (23.3 UK gal, 28 US gal/min) at 3000 rev/min
207 bar (3002 lbf/in
2
, 211 kgf/cm
2
)
3200 rev/min
Tandem axial piston Series 42 M28
28 cc/rev (1.71 in
3
/rev)
Servo non-feedback proportional, 18 bar (261 lbf/in
2
) to give max
pump displacement.
414 bar (6004 lbf/in
2
)
3000 rev/min
7.5 bar (109 lbf/in
2
) at 800 rev/min; 19.5 bar (283 lbf/in
2
) at 3000 rev/min
Tandem axial piston Series 40 M35
35 cc/rev (2.14 in
3
/rev)
Direct Displacement Manual Control
385 bar (5584 lbf/in
2
)
3100 rev/min
11 bar (160 lbf/in
2
) non adjustable
24 bar (348 lbf/in
2
)
5 bar (72 lbf/in
2
) at 15% stroke.
15 bar (217 lbf/in
2
) at 100% stroke.
3.3 to 3.7 bar (48 to 53 lbf/in
2
) at 15% stroke.
14.5 to 16.5 bar (210 to 239 lbf/in
2
) at 95% stroke.
Axial piston
328 cc/rev (20 in
3
/rev)
414 bar (6000 lbf/in
2
) continuous
305 rev/min continuous
100 l/min (22 UK gal/min, 32 US gal/min)
Axial piston
400 cc/rev (24.4 in
3
/rev)
414 bar (6000 lbf/in
2
) continuous
305 rev/min continuous
122 l/min (27 UK gal/min, 32 US gal/min)
Section E
Hydraulics
9803/8500
Section E
1 - 7
Issue 4*
Technical Data
Note: System Cleanliness is to be to ISO 16/13 - See page E/2 - 0 for guidance.
*
*
*
*
*
*
*