JCM GLOBAL TBV-100 FSH - User Manual

© 2010, Japan CashMachine Co, Limited
Support: http://www.jcmglobal.com/en/contact/default.aspx Web-Site: http://www.jcmglobal.com
Issue #4060-IGE-01-00
TBV
™
Series
Transaction Based Validator
Integration Guide
Revision A, August 6, 2010
P/N 960-100925R_Rev. A {EDP #186705}

Summary

General Information

Unit Overview

Provides a general overview and identifies the TBV unit.

Component Names

Illustrates the TBV component names and their locations.

Features, Models, and Software

Details the TBV's primary features, models, types, and software.

Cautions and Handling

Covers essential safety precautions and handling during installation and use.

Mounting, Dismounting, and Transportation

Details procedures for mounting, dismounting, and transporting the TBV unit.

Preventive Maintenance and Banknote Requirements

Outlines procedures for maintenance and requirements for accepted banknotes.

Specifications

Technical Specifications

Details technical parameters such as acceptance rate, bill types, and processing speed.

Environmental, Electrical, and Physical Specifications

Covers operating conditions, power requirements, and physical dimensions.

Installation

Installation Process and Mounting

Step-by-step guide for installing the TBV Unit into a host machine.

DIP Switch Configuration

Explains the settings for denomination and other functions via DIP switches.

Connector Pin Assignments

USB Interface Pin Assignments

Details the pinout for the TBV USB interface connector.

Photo-Coupler Interface Pin Assignments

Details the pinout for the TBV Photo-Coupler interface connector.

RS232 Interface Pin Assignments

Details the pinout for the TBV RS232 interface connector.

ccTalk Interface Pin Assignments

Details the pinout for the TBV ccTalk interface connector.

Preventive Maintenance

Banknote Retrieval and Jam Clearing

Procedures for removing deposited banknotes and clearing jams from the acceptor.

Cleaning Procedures

Guidelines for cleaning the TBV validation section sensors and rollers.

TBV Sensor and Roller Locations

Operational Flowchart

Standard Interface Circuit Schematics

USB Interface Schematic Diagram

Illustrates the USB interface circuit diagram for the TBV unit.

Photo-Coupler Interface Schematic Diagram

Illustrates the Photo-Coupler interface circuit diagram for the TBV unit.

RS232 Interface Schematic Diagram

Illustrates the RS232 interface circuit diagram for the TBV unit.

ccTalk Interface Schematic Diagram

Illustrates the ccTalk interface circuit diagram for the TBV unit.

LED Diagnostic Codes

Malfunction and Indication Conditions

Explains LED indications for malfunctions, error conditions, and their general status.

Standard Error Code Listings

Lists standard LED error codes, their causes, and potential solutions.

Reject Error Code Listings

Lists LED flash reject codes, their causes, and potential solutions.

Unit Dimensions

TBV Entire Unit Outside Dimensions

Provides detailed outside dimensions of the entire TBV unit.

Clearance and Cash Box Dimensions

Specifies required clearance dimensions and TBV cash box outside dimensions.

International Compliance

Technical Contact Information

JCM GLOBAL TBV-100 FSH Specifications