JCM Load Monitoring ALRS - Load Cell Resolution

9 | P a g e
Unit 6, Logman Centre, Greenbank Crescent,
East Tullos, Aberdeen, AB12 3BG
Tel: +44 (0) 01224 870765 sales@jcmload.com www.jcmload.com
Load Cell Resolution
The load cell resolution can be altered or changed during calibration process & set to
customers’ requirements if required.
JCM sets the resolution as standard unless requested from customers.
1Te - 12.5Te (0.002Te)
25Te - 75Te (0.005Te)
100Te – 500Te (0.010Te)
You can obtain the calibration instructions from JCM if you wish to adjust the resolution
during a calibration routine