Need help?Do you have a question about the jcm-tech M8NF and is the answer not in the manual?
General| Brand | jcm-tech |
|---|---|
| Model | M8NF |
| Category | Garage Door Opener |
| Language | English |
Disconnect power before installation or repair. Ensure proper door condition and safe manual unlock height.
Keep children away from controls and doors. Monitor door movement and check for wear or damage regularly.
Designed for automatic garage doors. Manufacturer may alter specifications without prior notice.
Steps for installing the control panel with a support bracket: unscrew, drill, and hang.
Steps for installing the control panel directly: unscrew, open, and drill into the wall.
Illustrates door positioning for open, closed, and stopped states during installation setup.
Step-by-step guide for programming the radio transmitter using control panel buttons and LEDs.
Procedure to perform a factory reset on the control panel via button presses and LED feedback.
Instructions for programming RadioBand3/RadioSens3 transmitters into the RSEC3 receiver.
Guides on adjusting sensitivity and setting the inhibition point for door safety devices.
Detailed steps for programming door maneuvers without using the RadioSens3 system.
Detailed steps for programming door maneuvers using the RadioSens3 system.
Confirms M8NF compliance with RED, Machine, and RoHS Directives; check website for details.
To Next Page