Page 22 of 28
Technical Support tac@jdsu.com 1 866 228-3762
Systems Engineer Dave.Baker@jdsu.com 321-243-0600
3.1 JDSU T-BERD 6000A RFC-6349 TCP Throughput Test
Use this procedure to set up a T-BERD 6000A to test TCP Throughput.
Step Action Details
1. Select Test For electrical handoffs: In the Test menu at the top of the Results screen,
and select Ethernet>10/100/1000>Layer 4 TCP Wirespeed>
IPv4>Terminate.
For optical handoffs: In the Test menu at the top of the Results screen,
and select Ethernet>1GigE Optical>Layer 4 TCP Wirespeed>
IPv4>Terminate.
To Next Page
Loading...
