To Next PageTo Next Page
Need help?Do you have a question about the Jebao DCP-2500 and is the answer not in the manual?
General| Brand | Jebao |
|---|---|
| Model | DCP-2500 |
| Category | Water Pump |
| Language | English |
Features advanced variable frequency motor for efficiency, energy saving, and stall protection.
Features IC electronic detection for automatic power-off protection upon no water.
Includes IC electronic detection for automatic power-off protection when no water is present.
The LED displays power, status, and fault codes; buttons are touch-sensitive.
Details how to start, stop, and adjust pump speed via the controller's buttons.
Important safety guidelines including avoiding dry running and improper lifting.
Avoid blockages at the water intake and never run the pump dry to prevent damage.
Steps to check if the pump is not working, including circuit, blockages, and impeller.
Explains fault codes (Er01-Er05) displayed on the controller for abnormal operation.
Do not connect to other power supplies, use in flammable liquids, or hot water.
Appliance not for persons with reduced capabilities without supervision; supervise children.
Disconnect power before cleaning/maintenance; avoid dry running, lifting by cord, or using in heating liquid.
Do not let the pump run dry as it will cause damage; typically, place pump in water and plug in.
Never let the pump run dry, as this can cause motor damage.
Check circuit, blockages in outlet/tubes, and impeller for jams or damage.
