Smart DC Pump
MDP Series
B. Android System
After input the Wi-Fi password, tap “Next” and choose the
device to start configuration. If the device cannot be found,
go to Phone Settings page>Wireless & networks > WLAN to
turn off and turn on the WLAN switch. The device will be
displayed.
Tap Start to control the device after the device has been
added successfully.
Remarks：
A. Before distributing network , open the phone location and
the corres ponding permissions.
B. You may be asked t o res tar t configuration process again if
put the wrong Wi-Fi password.
C. Try to put the device, mobile phone and router are placed
as close as possible.
D.The WIFI icon shows on the controller screen, after
confirmation successfully.
To Next Page
Loading...
