Component Fluid, Lubricant, or Genuine Part
Engine Oil – 1.6L / 2.0L Diesel Engine
With AdBlue (UREA)
For best performance and maximum protection under all types of operating conditions, the
manufacturer recommends API Certified SAE 0W-20 that meet the requirements of FCA Material
Standard 9.55535-DSX and ACEA C2.
NOTE:
• If lubricants compliant with the required specifications are not available, products that comply with
the minimum required characteristics can be used for topping off; in this case optimal performance
of the engine is not guaranteed.
• The use of products with specifications other than those indicated above could cause damage to the
engine not covered by the warranty.
Engine Oil Filter We recommend you use a Mopar Engine Oil Filter.
Spark Plugs – Gasoline Engines We recommend you use Mopar Spark Plugs.
Fuel Selection – 1.4L Gasoline Engine Minimum of 95 Research Octane Number (RON) specification EN228
Fuel Selection – Diesel Engines Diesel fuel conforming to the European specification EN590
Additive For Diesel Emissions (UREA) AdBlue (Urea-Water Solution) According To DIN 70 070 and ISO 22241-1
277
To Next Page
Loading...
