JENCO 3173 - Table of Contents

1
INITIAL INSPECTION……………………………………...…..………2
GENERAL INTRODUCTION……………………………………..……2
USING THE METER………………………………………………….…3
THE DISPLAY………………………………………………………….……...……3
THE KEYPAD……………………………………………………………….…...…4
CONNECTORS……………………………………………………………….….…4
REPLACING
THE BATTERIES…………………………………...…………..…5
TURNING ON / OFF THE INSTRUMENT………………………………………5
MODES OF
THE METER…………………………………………………………6
CALIBRATION SET-UP……………………………………...…………7
BEFORE CALIBRATE……………………………………………………….……7
CALIBRATION PROCESS………………………………………………..………7
MEASUREMENTS………………………………………………………9
RS-232C INTERFACE OPERATION (For 3173R only) ………...…..10
INTRODUCTION…………………………………………………………..……..10
PREPARATION………………………………………………………………...…10
DB-9 CONNECTOR CABLE……………………………………………….….…11
SOFTWARE………………………..………………………………………...….…11
PREPARING & STORAGE STANDARD SOLUTIONS……….... …11
ERROR DISPLAYS……………………………………………….….…13
SPECIFICATIONS………………………………………………..…….14
WARRANTY………………………………………………………....….15
RETURN OF ITEMS…………………………………………........…...16
3173/3173R