EasyManuals Logo

JENCO VisionPlus pH6175 User Manual

JENCO VisionPlus pH6175
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
2
GENERAL INTRODUCTION
Thank you for selecting the pH6175 meter. The pH6175 is a
precision tool that measures pH, mV and temperature. A built-in
microprocessor stores, calculates and compensates for all
parameters related to pH determinations including pH electrode
temperature characteristics, electrode slope deviations and buffer
solutions.
This meter has a waterproof IP54 case. The mechanical keys are
highly reliable with tactile and audio feedback. It is powered by six
AAA-size alkaline batteries or with a UL approved AC adapter
(OUTPUT:DC9V). The meter also displays a BAT message when
the batteries are in need of replacement. Re-calibration is not
required when power is restored.
The front of the meter has a large LCD that displays pH or mV and
temperature simultaneously along with user prompts and mode
indicators. The unit prompts the user through calibration and
measurement procedures.
An AUTOLOCK feature for both pH and mV measurements enables
the unit to automatically sense the end point and LOCK the display
to indicate the end point value of a measurement. AUTOLOCK and
user prompts help eliminate most errors in determining pH and mV
values, resulting in precise, repeatable and error-free
measurements. The pH6175 can also be used in non-AUTOLOCK
mode.
The model pH6175 is available with pH, ORP and ATC (Automatic
Temperature Compensation) probes. Other features include single
or dual or three point calibration, electrode offset recognition,
electrode slope recognition, electrode efficiency display, built-in
buffer coefficients, automatic or manual temperature compensation,
long battery life, and 50/60Hz AC noise rejection. This meter is
user-friendly for laboratory application.
INITIAL INSPECTION
Carefully unpack the unit and accessories. Inspect for damages
made in shipment. If any damage is found, notify your Jenco
representative immediately. All packing materials should be saved
until satisfactory operation is confirmed.
POWER INPUT
The model pH6175 can be powered by an 115V or 230VAC adaptor
as well as 6 AAA alkaline batteries. Check the label on the AC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JENCO VisionPlus pH6175 and is the answer not in the manual?

JENCO VisionPlus pH6175 Specifications

General IconGeneral
BrandJENCO
ModelVisionPlus pH6175
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals