Jenn-Air JES9750AAS User Manual (English)

Other manuals for Jenn-Air JES9750AAS

Questions and Answers:

T
Tyrone LandryAug 16, 2025
What to do if my Jenn-Air Ranges oven is not operating?
- T
  Travis JohnsonAug 17, 2025
  If your Jenn-Air Ranges oven isn't operating, it could be due to a few reasons. First, there might be a programming error; try switching the circuit breaker off for five minutes and then try the oven again. Second, check for a power outage by verifying power is present at the unit and ensuring the circuit breaker hasn't tripped. Also, check the household fuse, replace if needed, being careful not to exceed fuse capacity. Finally, the unit may be in Sabbath mode; refer to your Use & Care manual to remove it from Sabbath mode.
M
Matthew GillAug 19, 2025
Why are the clock and timer not working on my Jenn-Air Ranges?
- J
  Johnny EsparzaAug 19, 2025
  If the clock and timer on your Jenn-Air Ranges are not working, it might be due to a power outage. Verify that power is present at the unit and that the circuit breaker is not tripped. Another cause could be a locked electronic control. Replace the household fuse, being careful not to exceed its capacity. Refer to your Use and Care manual to unlock the electronic control.
K
Kimberly CookAug 22, 2025
What to do if the self-clean cycle is not working on my Jenn-Air Ranges?
- C
  Crystal KramerAug 22, 2025
  If the self-clean cycle on your Jenn-Air Ranges isn't working, it could be due to a programming error. Try turning off the circuit breaker for five minutes and then try the oven again. Also, verify that the door lock energizes and engages properly.
M
Michelle MorrisAug 26, 2025
Why won't the oven door unlock on my Jenn-Air Ranges?
- M
  Martin VargasAug 26, 2025
  If the oven door on your Jenn-Air Ranges will not unlock, it may be because the oven is running a self-cleaning cycle; allow the cycle to complete. Alternatively, the oven may still be too hot. It will not unlock until it has cooled to a safe temperature. Do not force the door open, as this will void the warranty.
E
ethomasAug 28, 2025
How to fix a Jenn-Air Ranges with no bake element operation?
- A
  Ashley SmithAug 28, 2025
  If the bake element in your Jenn-Air Ranges is not working, it could be due to a loose or broken wire connection. Check the element for continuity and replace it if it has failed. Another possibility is an open bake relay; verify that all connections are clean and tight and replace any broken wires. Also, verify 240 VAC is present at the bake element.
D
Derek WyattAug 31, 2025
How to troubleshoot a Jenn-Air Ranges with no broil element operation?
- A
  andrew21Aug 31, 2025
  If the broil element in your Jenn-Air Ranges is not working, it could be due to a loose or broken wire connection. Check the element for continuity and replace it if it has failed. Another possible cause is an open broil relay. Verify that all connections are clean and tight, and replace any broken wires. Also, verify that 240 VAC is present at the broil element.
D
Dominique DavisSep 3, 2025
Why doesn’t the surface element heat on my Jenn-Air Ranges?
- M
  michaelhamiltonSep 3, 2025
  If the surface element on your Jenn-Air Ranges doesn’t heat, it could be due to a loose or broken wire connection. Check the element for continuity and replace it if it has failed. Another possibility is a failed infinite switch; verify that all connections are clean and tight, and replace any broken wiring. Also, check the infinite switch and replace it if it has failed.
J
Justin RodriguezSep 6, 2025
What to do if the oven light does not operate on my Jenn-Air Ranges?
- M
  Mark CurtisSep 6, 2025
  If the oven light in your Jenn-Air Ranges does not operate, it could be due to failed wiring. Check the lamp and replace it if necessary. Another cause might be a failed light socket; check for broken, loose, or dirty connections. Also, check the light socket for continuity.
W
William RoseSep 9, 2025
Why does my Jenn-Air Ranges oven smoke or have an odor during the first few uses?
- D
  Danielle WadeSep 9, 2025
  Minor smoking or odor is normal the first few times you use your Jenn-Air Ranges oven. Ensure the area is well-ventilated and perform a self-clean cycle.

Jenn-Air JES9750AAS Specifications

General

Brand	Jenn-Air
Model Number	JES9750AAS
Product Type	Range
Fuel Type	Electric
Number of Burners	5
Self-Cleaning	Yes
Wi-Fi Connectivity	Yes
Color	Stainless Steel
Cooktop Surface	Glass
Width	30 inches
Convection Cooking	Yes
Depth	28.5 inches
Height	36 inches

Summary

Important Information

Important Notices for Servicers and Consumers

Notices for servicers and consumers regarding safety and service procedures.

Customer Service Support Center

Contact information for customer support and service inquiries.

Recognize Safety Symbols, Words, and Labels

Explanation of safety symbols, hazard levels, and warning labels used in the manual.

Important Safety Information

All Appliances Safety Guidelines

General safety precautions applicable to all appliances.

Surface Cooking Units Safety

Specific safety precautions for surface cooking units.

Oven Safety Precautions

Safety guidelines related to oven operation and maintenance.

Self-Cleaning Oven Safety

Precautions specific to self-cleaning oven features.

Glass/Ceramic Cooking Surface Safety

Safety advice for handling and cleaning glass/ceramic cooktops.

Ventilation Hood Safety

Safety guidelines for ventilation hoods and filters.

Fire Safety Procedures

Instructions on how to handle surface element or oven fires.

General Precautions

General safety advice for appliance usage and maintenance.

Product Safety Devices

Information on safety devices engineered into the product.

Grounded Oven Frame

Explanation of the grounding mechanism for the oven frame.

General Information

Cooking Nomenclature and Model Identification

Explanation of model number coding and identification.

Specifications Reference

Reference to technical sheets for detailed product specifications.

Oven Placement Guidelines

Recommendations for proper placement of the oven for safety and airflow.

Air Vent Clearance

Importance of keeping air vents clear for proper oven operation.

Model and Serial Number Location

Guidance on finding the model and serial number for service.

Grounding Instructions

Essential safety instructions for proper grounding of the appliance.

Model Identification and Registration

Instructions for identifying the model and registering the product.

Locating Authorized Servicers

Information on how to find authorized service technicians.

Parts and Accessories Ordering

Information on how to purchase replacement parts and accessories.

Extended Service Plan Information

Details about the extended service protection plan.

Range Description and Components

Overview of Range Components

Diagram and labels identifying key components of the electric slide-in range.

Troubleshooting Procedures

Troubleshooting Chart: Common Problems and Solutions

Table listing common problems, their possible causes, and corrections.

Fault Code Chart

List of fault codes, their descriptions, and components to troubleshoot.

Oven Sensor and Meat Probe Charts

Charts providing resistance values for oven sensors and meat probes.

Component Testing Procedures

Oven Light Housing Testing

Procedure to test the oven light housing and bulb for continuity.

Step-Down Transformer Testing

Procedure to test the voltage output of the step-down transformer.

Door Plunger Switch Testing

Procedure to test the continuity of the door plunger switch.

Autolatch Assembly Testing

Procedure to test the autolatch assembly and its switch.

Halogen Element Testing

Procedures to test halogen elements for resistance and voltage.

Coil Element Testing

Procedures to test coil elements for resistance and voltage.

Ribbon Element Testing

Procedures to test ribbon elements for resistance and voltage.

Temperature Sensor Testing

Procedure to test the oven temperature sensor resistance.

Infinite Switch Testing

Procedure to test infinite switches for time-on percentages.

Dual Element Infinite Switch Testing

Procedure to test dual element infinite switches.

Bake Element Testing

Procedure to test bake elements for resistance and voltage.

Broil Element Testing

Procedure to test broil elements for resistance and voltage.

Grill Assembly Testing

Procedure to test grill assembly for resistance and voltage.

Hi-Limit Temperature Switch Testing

Procedure to test the hi-limit temperature switch operation.

Convection Motor Testing

Procedure to test convection motor voltage and windings.

Cooling Fan Motor Testing

Procedure to test cooling fan motor voltage and windings.

Downdraft Motor Testing

Procedure to test downdraft motor voltage and windings.

Electronic Control Panel Testing

Testing procedures for the electronic control panel connections.

Oven Control Testing Procedures

Oven Temperature Adjustment Test

Procedure to test oven temperature calibration settings.

End-of-Timer Beep Setting Test

Procedure to test setting the number of reminder beeps.

Control Lock Setting Test

Procedure to test the control lock function for cleaning.

Sabbath Mode Setting Test

Procedure to test the Sabbath mode for indefinite operation.

Sound Level Setting Test

Procedure to test the sound level settings from lowest to highest.

24-Hour Clock Setting Test

Procedure to test the 12-hour or 24-hour clock setting.

Scroll Speed Setting Test

Procedure to test the speed of displayed messages.

End-of-Cook-Time Signal Test

Procedure to test the number of beeps for cook cycle completion.

Temperature Display Setting Test

Procedure to select temperature display in °F or °C.

Language Display Setting Test

Procedure to select the display language (English, French, Spanish).

Factory Default Reset Test

Procedure to reset the clock to factory settings.

Clock Display Setting Test

Procedure to select clock display (on or off).

Test Access Mode

Procedure to access functions for testing purposes.

Component Testing Procedures

Control Panel Assembly Testing

Testing procedures for control panel circuitry resistance.

Relay Logic Chart

Chart detailing relay states (ON/OFF/CYCLING) for different cooking modes.

Electronic Oven Control (EOC) Quick Test Mode

Procedure for performing a quick test of the EOC II functions.

Description of Fault Codes

Explanation of fault codes, their descriptions, and troubleshooting components.

Disassembly Procedures

Removing and Replacing the Range

Steps to safely remove and reinstall the entire range unit.

Cartridge Assembly Disassembly

Procedure for removing and reinstalling cooktop cartridges.

Maintop Assembly Disassembly

Steps to remove and reinstall the maintop assembly.

Control Panel Disassembly

Procedure for removing and reinstalling the control panel.

Electronic Control Disassembly

Procedure for removing and reinstalling the electronic control module.

Infinite Switch Disassembly

Procedure for removing and reinstalling the infinite switch.

Bottom Access Panel Disassembly

Procedure for removing and reinstalling the bottom access panel.

Indicator Light Disassembly

Procedure for removing and reinstalling indicator lights.

Transformer Disassembly

Procedure for removing and reinstalling the transformer.

Bake Element Disassembly

Procedure for removing and reinstalling the bake element.

Broil Element Disassembly

Procedure for removing and reinstalling the broil element.

Meat Probe Receptacle Disassembly

Procedure for removing and reinstalling the meat probe receptacle.

Back Panel Disassembly

Procedure for removing and reinstalling the back panel.

Cooling Fan Disassembly

Procedure for removing and reinstalling the cooling fan.

Downdraft Blower Motor Disassembly

Procedure for removing and reinstalling the downdraft blower motor.

Oven Sensor Disassembly

Procedure for removing and reinstalling the oven sensor.

Front Side Trim Disassembly

Procedure for removing and reinstalling the front side trim.

Oven Light Bulb and Socket Disassembly

Procedure for replacing the oven light bulb or socket.

Oven Light Switch Disassembly

Procedure for removing and reinstalling the oven light switch.

Convection Fan Disassembly

Procedure for removing and reinstalling the convection fan motor.

Oven Vent/Smoke Eliminator Disassembly

Procedure for removing and reinstalling the oven vent/smoke eliminator.

Hi-Limit Thermostat Disassembly

Procedure for removing and reinstalling the hi-limit thermostat.

Oven Door Hinge Disassembly

Procedure for removing and reinstalling oven door hinges.

Oven Door Latch Disassembly

Procedure for removing and reinstalling the oven door latch assembly.

Oven Door Removal and Reinstallation

Steps for safely removing and reinstalling the oven door.

Oven Door Disassembly

Detailed steps for disassembling the oven door.

Appendix A: Installation Instructions

Installation for JES8750AA/JES8850A Models

Installation guidelines and clearances for JES8750AA and JES8850A models.

Installation for JES9750A/JES9800A/JES9860A Models

Installation guidelines and clearances for JES9750A, JES9800A, and JES9860A models.

Mobile Home Installation Requirements

Specific installation requirements for ranges in mobile homes.

Anti-Tip Device Installation

Instructions for securely installing the anti-tip bracket.

Range Location Guidelines

Recommendations for choosing the optimal location for the range.

Connecting the Range to Power

Guidelines for connecting the range to the electrical supply.

Electric Supply Requirements

Requirements for local and national electric codes for installation.

Electric Supply Requirements (Canada)

Canadian electric code requirements for range installation.

Outside Wiring Considerations

Advice on checking home wiring adequacy for the range's electrical load.

House Wiring Guidelines

Requirements for house wiring, circuits, and disconnects.

Range Electrical Connections

Instructions for connecting the range to the power supply.

Range Electrical Connections (Canada)

Instructions for connecting Canadian models to the power supply.

3-Wire Service Cord/Conduit Installation

Procedure for connecting a 3-wire service cord or conduit.

4-Wire Service Cord/Conduit Installation

Procedure for connecting a 4-wire service cord or conduit.

Conversion from 3-Wire to 4-Wire Service

Instructions for converting a 3-wire service cord to a 4-wire service.

Downdraft Installation Instructions

Guidance on installing the downdraft ventilation system.

Determine Venting Location

Guidance on selecting the location for the downdraft vent opening.

Rear Wall Venting

Procedure for venting the downdraft blower through the rear wall.

Floor Venting

Procedure for venting the downdraft blower through the floor.

Side Cabinet Venting

Procedure for venting the downdraft blower through side cabinets.

Appendix B: Use Information

Use Information for JES8750AA/JES8850A Models

Guidance on operating the oven control panel and functions.

Oven Cooking Operations (JES8750/JES8850)

Guide to operating various oven cooking modes and controls.

Control Pad Operation (JES8750/JES8850)

How to operate the control panel buttons and understand feedback.

Setting Control Functions (JES8750/JES8850)

Instructions for setting various control options and functions.

Clock Pad Operation (JES8750/JES8850)

How to set and recall the time of day on the oven control.

Timer Pad Operation (JES8750/JES8850)

How to set and use the oven timers independently.

Bake Pad Operation (JES8750/JES8850)

Instructions for using the Bake pad for baking and roasting.

Convect Bake/Roast Pad Operation (JES8750/JES8850)

Instructions for using Convect Bake and Convect Roast functions.

Broil Pad Operation (JES8750/JES8850)

Instructions for using the Broil pad for top browning and broiling.

Cook Time/Stop Time Pad Operation (JES8750/JES8850)

Instructions for programming automatic start and stop cooking times.

Quick Preheat Pad Operation (JES8750/JES8850)

How to use the Quick Preheat pad to decrease preheating time.

Use Information for JES9750A/JES9860A Models

Guidance on operating the oven control panel and functions.

Keep Warm Pad Operation (JES9750/JES9860)

Instructions for keeping foods warm or warming breads and plates.

Bread Proofing Pad Operation (JES9750/JES9860)

Instructions for proofing yeast bread products.

Meat Probe Pad Operation (JES9750/JES9860)

Instructions for using the meat probe for roasting and baking.

Drying Pad Operation (JES9750/JES9860)

Instructions for drying fruits, vegetables, and herbs.

Use Information for JES9800A Model

Guidance on operating the oven control panel and functions.

Oven Cooking Operations (JES9800A)

Guide to operating various oven cooking modes and controls.

Control Pad Operation (JES9800A)

How to operate the control panel buttons and understand feedback.

Setting Control Functions (JES9800A)

Instructions for setting various control options and functions.

Clock Pad Operation (JES9800A)

How to set and recall the time of day on the oven control.

Timer Pad Operation (JES9800A)

How to set and use the oven timers independently.

Bake Pad Operation (JES9800A)

Instructions for using the Bake pad for baking and roasting.

Convect Bake/Roast Pad Operation (JES9800A)

Instructions for using Convect Bake and Convect Roast functions.

Broil Pad Operation (JES9800A)

Instructions for using the Broil pad for top browning and broiling.

Cook Time/Stop Time Pad Operation (JES9800A)

Instructions for programming automatic start and stop cooking times.

Quick Preheat Pad Operation (JES9800A)

How to use the Quick Preheat pad to decrease preheating time.

Care and Cleaning Procedures

General Cleaning Procedures and Precautions

General advice and precautions for cleaning the appliance safely.

Access Panel Cleaning

How to clean the access panel.

Broiler Pan and Insert Cleaning

Instructions for cleaning the broiler pan and insert.

Clock and Control Pad Area Cleaning

How to clean the clock and control pad area safely.

Control Panel Cleaning

Instructions for cleaning the control panel surface.

Control Knobs Cleaning

How to remove, wash, and reinstall control knobs.

Porcelain Enamel Cooktop Cleaning

Instructions for cleaning the porcelain enamel cooktop surface.

Plastic Door Handle Cleaning

How to clean plastic door handle finishes safely.

Oven Window and Door Glass Cleaning

Instructions for cleaning the oven door glass.

Oven Interior Cleaning

Reference to self-clean cycle instructions for interior cleaning.

Oven Racks Cleaning

Instructions for cleaning oven racks and maintaining smooth movement.

Stainless Steel Cleaning

Specific instructions for cleaning stainless steel surfaces.

Painted Enamel Storage Drawer Cleaning

How to clean the painted enamel storage drawer.

Grill Accessories Cleaning

Instructions for cleaning grill accessories like basin pan and grates.

Cooktop Element Cleaning

Instructions for cleaning cooktop elements and terminal blocks.

Non-Stick Cast Aluminum Grates Cleaning

How to clean non-stick coated cast aluminum grates.

Grease Cup Cleaning

Instructions for cleaning the grease collection cup.

Related product manuals

Jenn-Air JES9750AAW

55 pages

Jenn-Air JES9750AA Series

55 pages

Jenn-Air JES9750CAB00

Jenn-Air JES9860CCS02

80 pages

Jenn-Air JES9800BA Series

67 pages

Jenn-Air JES9900BA Series

67 pages

Jenn-Air JES9750AAS User Manual

Table of Contents

Other manuals for Jenn-Air JES9750AAS

Questions and Answers:

Jenn-Air JES9750AAS Specifications

Summary

Important Information

Important Notices for Servicers and Consumers

Customer Service Support Center

Recognize Safety Symbols, Words, and Labels

Important Safety Information

All Appliances Safety Guidelines

Surface Cooking Units Safety

Oven Safety Precautions

Self-Cleaning Oven Safety

Glass/Ceramic Cooking Surface Safety

Ventilation Hood Safety

Fire Safety Procedures

General Precautions

Product Safety Devices

Grounded Oven Frame

General Information

Cooking Nomenclature and Model Identification

Specifications Reference

Oven Placement Guidelines

Air Vent Clearance

Model and Serial Number Location

Grounding Instructions

Model Identification and Registration

Locating Authorized Servicers

Parts and Accessories Ordering

Extended Service Plan Information

Range Description and Components

Overview of Range Components

Troubleshooting Procedures

Troubleshooting Chart: Common Problems and Solutions

Fault Code Chart

Oven Sensor and Meat Probe Charts

Component Testing Procedures

Oven Light Housing Testing

Step-Down Transformer Testing

Door Plunger Switch Testing

Autolatch Assembly Testing

Halogen Element Testing

Coil Element Testing

Ribbon Element Testing

Temperature Sensor Testing

Infinite Switch Testing

Dual Element Infinite Switch Testing

Bake Element Testing

Broil Element Testing

Grill Assembly Testing

Hi-Limit Temperature Switch Testing

Convection Motor Testing

Cooling Fan Motor Testing

Downdraft Motor Testing

Electronic Control Panel Testing

Oven Control Testing Procedures

Oven Temperature Adjustment Test

End-of-Timer Beep Setting Test

Control Lock Setting Test

Sabbath Mode Setting Test

Sound Level Setting Test

24-Hour Clock Setting Test

Scroll Speed Setting Test

End-of-Cook-Time Signal Test

Temperature Display Setting Test

Language Display Setting Test

Factory Default Reset Test

Clock Display Setting Test

Test Access Mode

Component Testing Procedures

Control Panel Assembly Testing

Relay Logic Chart

Electronic Oven Control (EOC) Quick Test Mode

Description of Fault Codes

Disassembly Procedures

Removing and Replacing the Range

Cartridge Assembly Disassembly

Maintop Assembly Disassembly