©2004 Maytag Services 16023510 7
Specifications
Refer to individual Technical Sheet for specification
information.
Placement of the Vent Hood
This electric vent hood must be placed in the kitchen or
comparable room. All safety guidelines must be followed
(see Chapter 2) and free air flow around the vent hood is
essential.
Do Not Block Air Vents
All air vents must be kept clear during cooking. If air
vents are covered during operation, the vent hood may
overheat.
Location of Model Number
To request service information or replacement parts, the
service center will require the model number of your vent
hood. This number can be found inside or under the vent
hood shroud.
Grounding Instructions
This vent hood must be grounded. If an electrical short
circuit occurs, grounding reduces the risk of electric
shock by providing an escape wire for the electric current.
The cord for this vent hood has a grounding wire with a
grounding plug. Put the plug into an outlet that is properly
installed and grounded.
WARNING
!
To avoid risk of electric shock, personal injury or death,
use grounding plug properly.
Ask a qualified electrician if you do not understand the
grounding instructions or if you wonder whether the vent
hood is properly grounded.
Keep the electrical power cord dry and do not pinch or
crush it in any way.
General Information
For a permanently connected vent hood: This vent hood
must be connected to a grounded, metallic, permanent
wiring system, or an equipment grounding conductor
should be run with the circuit conductors and connected
to the equipment grounding terminal or lead on the
appliance.
WARNI NG
!
Attaching adapter ground terminal to wall receptacle
cover screw does not ground the vent hood unless the
cover screw is metal and not insulated, and wall
receptacle is grounded through the house wiring.
Consumer should have circuit checked by a qualified
electrician to verify receptacle is properly grounded.
Model Identification
Complete enclosed registration card and promptly return.
If registration card is missing:
• For Jenn-Air product call 1-800-688-1100 or visit the
Web Site at www.jennair.com
• For product in Canada call 1-866-587-2002 or visit the
Web Site at www.jennair.com
When contacting provide product information located on
rating plate. Record the following:
Model Number: ___________________
Manufacturing Number: ___________________
Serial or S/N Number: ___________________
Date of purchase: ___________________
Dealer’s name and address: ___________________
Service
Keep a copy of sales receipt for future reference or in
case warranty service is required. To locate an authorized
servicer:
• For Jenn-Air product call 1-800-688-1100 or visit the
Web Site at www.jennair.com
• For product in Canada call 1-866-587-2002 or visit the
Web Site at www.jennair.com
Warranty service must be performed by an authorized
servicer. We also recommend contacting an authorized
servicer, if service is required after warranty expires.
Parts and Accessories
Purchase replacement parts and accessories over the
phone. To order accessories for your product call:
• For Jenn-Air product call 1-800-688-1100 or visit the
Web Site at www.jennair.com
• For product in Canada call 1-866-587-2002 or visit the
Web Sites at www.amana.com or www.maytag.com
Extended Service Plan
We offer long-term service protection for this new oven.
• Dependability Plus
SM
Extended Service Plan is
specially designed to supplement Jenn-Air’s strong
warranty. This plan covers parts, labor, and travel
charges.
Call 1-800-925-2020 for information.