E-12
CASSETTE PLAYER / RECORDER OPERATION
1. Press the CASSETTE STOP/EJECT BUTTON (#5) to open the Cassette Door and
insert a pre-recorded cassette tape with the exposed tape facing upwards. Push the
Cassette Door to close it.
2. Slide the FUNCTION SELECTOR (#29) to OFF/TAPE position, press the CASSETTE
PLAY
BUTTON (#8) to start playback and adjust the Rotary Volume Control to obtain
the desired sound level.
3. Press the CASSETTE F.FWD
BUTTON (#6) or the CASSETTE REW
BUTTON (#7)
to rapidly advance or rewind the tape.
4. Press the CASSETTE PAUSE BUTTON (#4) to pause the playback, press it again to
resume the playback.
5. Press the CASSETTE STOP/EJECT BUTTON (#5) to stop operation.
Recording from the Radio/Bluetooth/CD/Auxiliary source
1. Set the FUNCTION SELECTOR (#29) to OFF/TAPE position.
2. Press the CASSETTE STOP/EJECT BUTTON (#5) to open the cassette holder.
3. Insert a tape and close the Cassette Holder.
4. Select the desired sound source with the FUNCTION SELECTOR (#29).
In radio mode, tune to your desired radio station.
In Bluetooth mode, start playback from your Bluetooth device.
In CD mode, start playback from the CD player.
In AUX mode, start playback from your auxiliary source.
5. Press CASSETTE RECORD
BUTTON (#9). The CASSETTE PLAY
BUTTON (#8) is
depressed automatically.
6. To pause recording, press the CASSETTE PAUSE BUTTON (#4). Press the
CASSETTE PAUSE BUTTON (#4) again to resume recording.
7. To stop recording, press the CASSETTE STOP/EJECT BUTTON (#5).
8. To listen to your recording, set the FUNCTION SELECTOR (#29) to OFF/TAPE position.
Press the CASSETTE REW
BUTTON (#7) to rewind the tape to search your recording,
and then press the CASSETTE PLAY
BUTTON (#8) to listen.
AUTOMATIC STOP
To protect your cassette tapes and prevent unnecessary wear to the pinch roller of the
cassette mechanism, this unit is equipped with an Automatic Stop System. When the tape
ends during play, the CASSETTE PLAY
BUTTON (#8) will automatically release to stop the
cassette from running.
To Next Page
Loading...
