VX6020
Installation Guide
What’s in the Box
The following items are supplied with
the VX6020:
• VX6020 Head Unit
• Custom Cosmetic Trim Ring
• Hardware Bag
• Power/Speaker Output Harness
• GPS Antenna Harness
• I/O Harness
• USB-A to Mini USB Adapter
• Owners Manual & Warranty Card
• Installation Guide
Tools and Supplies
The following tools and supplies are
needed to install the VX6020:
• Torx type, at-head and Philips
screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screw
driver, socket wrench set or other
tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
WARNING! Never install this unit where operation and viewing could interfere with
safe driving conditions.
To Next Page
