Jensen VX7020N User Manual (English)

Questions and Answers:

J
Jerry WhiteAug 14, 2025
Why Jensen VX7020N unit will not turn on?
- A
  andrewwillisAug 14, 2025
  If your Jensen Car Receiver isn't turning on, it could be due to several reasons. The yellow or red wire might not be connected properly or have incorrect voltage; in this case, check the connections to ensure they have the correct voltage (11~16VDC). Another possibility is that the black wire isn't connected to ground, so verify that connection as well. Lastly, a blown fuse could be the culprit, so try replacing the fuse.
E
erica87Aug 17, 2025
What to do if Jensen VX7020N Car Receiver unit blows fuses?
- N
  Nicole HillAug 17, 2025
  If your Jensen Car Receiver keeps blowing fuses, it could be due to a few reasons. The yellow or red wire might be touching the chassis ground, or speaker wires might be doing the same; check for any pinched wires. Also, make sure you are using a fuse with the correct rating.
M
Melissa SmithAug 21, 2025
How to fix Jensen Car Receiver when unit has power but no sound?
- L
  Lori DavisAug 21, 2025
  If your Jensen Car Receiver has power but no sound, the issue might be with the speaker wires. Check the connections at the speakers to ensure they are properly connected. Also, one or more speaker wires might be touching each other or the chassis ground. Insulate all bare speaker wires from each other and the chassis ground to resolve this.
Z
Zoe SantanaAug 25, 2025
What to do if Jensen VX7020N shows ERR FILE on display?
- J
  jrobertsAug 26, 2025
  If your Jensen Car Receiver displays 'ERR FILE', it indicates a disc read error, or that the disc is upside down, or a focus error. Try pressing the eject button or the RESET button.
G
Gabrielle HarrisAug 29, 2025
Why Jensen Car Receiver is excessively skipping?
- A
  Anthony ClarkAug 29, 2025
  Excessive skipping on your Jensen Car Receiver can occur if the unit isn't mounted correctly or the backstrap isn't secure; check the mounting sleeve and backstrap support. It can also happen due to a physical defect in the media (CD, CD-R, or CD-RW); check the disc for scratches.
J
Jason ThomasSep 2, 2025
What to do if Jensen VX7020N unit will not accept a disc?
- M
  Melissa TaylorSep 2, 2025
  If your Jensen Car Receiver won't accept a disc, it could be that the CD mechanism position is out of alignment; press EJECT to reset the CD mechanism position. Alternatively, the CD transit screws might still be in place; remove the 2 transit screws located on top of the unit.
Q
qcummingsSep 5, 2025
What does NO FILE mean on Jensen VX7020N Car Receiver display?
- J
  Julia DillonSep 5, 2025
  If 'NO FILE' appears on the display of your Jensen Car Receiver, it means that no playable MP3 files were found on the device. Check the device to ensure that there are valid MP3 files.
G
georgeconwaySep 9, 2025
What does NO SUPPORT mean on Jensen Car Receiver display?
- R
  Rebecca PatelSep 9, 2025
  If your Jensen Car Receiver displays 'NO SUPPORT', it means that an invalid ID3 tag version is present. Only Version 1.0 to 2.0 ID3 tags are supported.

Jensen VX7020N Specifications

General

Bluetooth	Yes
USB Ports	1
USB Input	Yes
Radio Tuner	AM/FM
Rear Camera Input	Yes
Navigation	No
Resolution	800 x 480
AUX Input	Yes
Video Playback	Yes
SD Card Slot	Yes
Display	Touchscreen
Screen Size	7 inches
Audio Formats Supported	MP3, WMA, AAC
Video Formats Supported	MP4, AVI
Power Output	50W x 4
Compatibility	Android, iOS