Why does my Jensen VX7010 keep resetting itself?
If your Jensen Car Receiver resets itself when the engine is off, it is likely due to an incorrect connection between the ACC and the positive battery wire. Check the wiring and correct it.
Why is there no sound coming from my Jensen VX7010?
If you're experiencing no or low audio output from your Jensen Car Receiver, there might be several reasons: * Improper audio output connection: Check the wiring and correct any issues. * Volume set too low: Increase the volume level. * Improper “MUTE” connection: Review the wiring diagram and check the “MUTE” connection. * Speakers damaged: Replace the speakers. * Heavily biased volume balance: Adjust the channel balance to the center position. * Speaker wiring is in contact with a metal part of the car: Insulate all speaker wiring connections.
How to fix a Jensen Car Receiver that won't turn on?
If your Jensen Car Receiver will not power on, it could be due to a few reasons: * A blown radio fuse: Replace the fuse with a new one of the correct rating. * A blown car battery fuse: Replace the fuse with a new one of the correct rating. * Illegal operation: Press the RESET button located in the middle of the left side of the front panel.
What to do if my Jensen VX7010 has poor sound quality?
Poor sound quality or distortion in your Jensen Car Receiver can stem from a few causes: * Using a pirated disc: Use an original copy of the disc. * Speakers not compatible with the unit: Connect proper speakers. * Shorted speaker: Check the speaker contact.
General| Display Size | 6.2 inches |
|---|---|
| Resolution | 800 x 480 Pixels |
| Bluetooth | Yes |
| USB Ports | 1 |
| Radio Tuner | AM/FM |
| GPS Navigation | No |
| DVD Player | Yes |
| SD Card Slot | Yes |
| Backup Camera Input | Yes |
| Steering Wheel Control Compatible | Yes |
| AUX Input | Yes |
| Video Playback | Yes |
| Display Type | LCD |
| Audio Output Power | 50 Watts x 4 |
| Supported Media Formats | MP3, WMA, AVI, MP4 |
| Compatibility | Android, iOS |
Details compliance with FCC radiation exposure limits for uncontrolled environments.
Lists features related to DVD playback, including audio equalizer and disc controls.
Details CD, MP3, and WMA playback capabilities, including file compatibility.
Outlines AM/FM radio capabilities, including station presets and tuning options.
Explains connectivity for iPod and iPhone, including high-speed interface and charging.
Describes SiriusXM-Ready functionality, including channel display and subscription requirements.
Covers chassis specifications, screen details, and general unit features like Bluetooth.
Details the function of each button and indicator on the VX7010's front panel.
Explains how to use the remote control and install/remove its battery.
Provides a detailed explanation of each button's function on the remote control.
Explains how to open, close, and adjust the tilt angle of the TFT monitor.
Details how to connect external devices using AV-In1, AV-In2, and USB ports.
Guides users through turning the unit on/off and selecting audio/video sources.
Explains how to access and adjust various system settings like volume and equalizer.
Covers playing discs, ejecting them, resetting the system, and parking brake inhibit.
Details how to adjust equalizer settings, balance, fader, and subwoofer levels.
Describes various system settings including General, Audio, Time, Language, Bluetooth, DVD, Volume.
Explains settings for subwoofer output, crossover, date, and clock mode.
Covers language selection for OSD, DVD audio/subtitle, Bluetooth features, and DVD parental lock.
Details relative volume adjustments for sources and displays system version information.
Explains DVD playback, main menu, and controls like A-B repeat and audio/language selection.
Covers CD operation, list display, shuffle, repeat, and MP3/WMA file requirements.
Provides information on disc properties, play time, and disc symbols for compatibility.
Details the radio tuner display, presets, seeking functions, RDS, CT, and PTY.
Explains direct entry tuning, using preset stations, auto store, and local/distance seeking.
Covers connecting USB devices, file playback, list display, and direct entry.
Details accessing iPod/iPhone mode, main menu, list display, and playback controls.
Explains audio/video playback from external devices via AV-In1 (3.5mm) and AV-In2 (RCA).
Covers Bluetooth basics, pairing procedures, managing calls, and music streaming.
Details HFP connection, pairing, managing incoming/outgoing calls, and audio mute.
Provides a step-by-step guide to accessing and starting the iGO Primo navigation software.
Explains how the rear camera feature works, including 'No Signal' display.
Details SWC compatibility, available controls, and the process for programming custom functions.
Covers Pandora Radio interface, playback controls, station lists, and error messages.
Explains how to activate SiriusXM radio, use the interface, search channels, and lock mature channels.
Provides solutions for common issues like no power, low audio output, and sound distortion.
Addresses issues related to the TFT monitor, tuner reception, and disc playback problems.
Provides instructions for cleaning and maintaining the unit to ensure longevity.
Lists detailed technical specifications for the DVD/CD player, video, tuners, monitor, and general unit.
Covers what's in the box, tools needed, optional equipment, battery disconnect, and ISO-DIN installation.
Illustrates the necessary wiring connections for proper installation and functionality.
Details critical safety warnings and precautions for using the navigation system while driving.
Outlines essential safety rules for drivers to prevent accidents and injuries.
Provides a step-by-step guide to accessing and starting the iGO Primo navigation software.
Introduces the navigation system, its features, and key specifications.
Explains how GPS and GNSS work to determine vehicle location and position.
Guides on how to acquire a GPS signal and interpret GPS reception quality icons.
Covers initial system use, accessing software, adjusting voice volume, and switching sources.
Guides through the initial setup process, including language, license agreement, and configuration.
Explains how to navigate menus, use buttons, icons, keyboards, and gestures on the touch screen.
Details how to navigate on the map, zoom, tilt, rotate, and change views (2D/3D).
Explains Vehimarker, Cursor, selected map objects, and elements of an active route.
Describes junction view for exits/intersections and different 3D object types supported.
Explains the Quick Menu and how to configure various settings like route planning, map appearance, and guidance.
Details how to view current position information and search for nearby services like gas stations or police.
Guides on entering addresses, cities, streets, ZIP codes, and intersections for route planning.
Explains how to select destinations from map locations, city centers, favorites, and history.
Details searching for places by name, category, preset types, and using quick search features.
Covers saving locations as favorites, editing routes, pausing/canceling routes, and checking route alternatives.
Explains entering coordinates, building routes, viewing entire routes, and checking route parameters.
Details how to change destinations, starting points, edit routes, and pause/cancel active routes.
Explains how to set vehicle type and preferred road types for route calculation.
Guides on saving locations as favorite destinations or alert points and editing them.
Explains how to run a route simulation and use the simulation control buttons.
Explains concepts like Smart Zoom, color themes, route calculation methods, and green routing.
Details proximity alerts for cameras, schools, and speed limit warnings.
Explains the 'More' menu, Settings menu, and customization of quick menus and system parameters.
Covers map settings like view mode, color themes, vehicle models, landmarks, and visual guidance options.
Details adjusting sound volume, voice guidance, warnings, and enabling traffic data.
Explains how to set vehicle types, road types, and green routing preferences for route calculation.
Covers map appearance settings, visual guidance, display settings, and trip monitor logging.
Defines navigation terms like GPS reception, active route, color themes, and map orientation.
Outlines the legal terms and conditions for using the software product.
Details software update information, including Bluetooth call handling and volume settings.
Explains warranty coverage, what is and isn't covered, and limitations on liability.
To Next Page
