Why does my Jensen VX4012 Car Receiver keep resetting itself?
If your Jensen Car Receiver resets itself when the engine is off, it is likely due to an incorrect connection between the ACC and the positive battery wire. Check the wiring and correct it.
Why is there no sound coming from my Jensen Car Receiver?
If you're experiencing no or low audio output from your Jensen Car Receiver, there might be several reasons: * Improper audio output connection: Check the wiring and correct any issues. * Volume set too low: Increase the volume level. * Improper “MUTE” connection: Review the wiring diagram and check the “MUTE” connection. * Speakers damaged: Replace the speakers. * Heavily biased volume balance: Adjust the channel balance to the center position. * Speaker wiring is in contact with a metal part of the car: Insulate all speaker wiring connections.
General| Bluetooth | Yes |
|---|---|
| DVD Player | No |
| AM/FM Tuner | Yes |
| Rear View Camera Input | Yes |
| Steering Wheel Control Compatible | Yes |
| Auxiliary Input | Yes |
| Remote Control | Yes |
| Display Type | LCD |
| Display Size | 4.0 inches |
| USB Ports | 1 |
| Audio Formats Supported | MP3/WMA |
To Next Page
