•
•
•
SAFETY
Salety is all-important when working with machinery. Accidents
happen when established salety practices have been overlooked.
Read and practice all safety points listed in this manual. salety is
the I riMe responsibility 01 the operator.
1. Read operating and loading instructions thoroughly.
2. Review the Sale Towing Application Rating (S.T .A.A.) placard
located on the headboard 01the deck, and become famDiar with
the loads that your unit can salely transport.
3. Observe all waming decals.
4. Make sure you are. clear 01 oncoming traffic. Dual controls
(driver's side and passenger's side) are standard on all Jerr-
Dan roll back units.
5. Always put bumper on the ground to support the body and truck
frame .
-~
...••...
6. Never exceed the rated capacity 01 the body or truck chassis 01
use tow bar/wheel lift without a vehicle on the deck .
Aev. _
1.0
Date _
Eastern Wrecker Sales Inc
To Next Page
Loading...