JESS WELDING MIG 296 - Page 49

operation instructions page 20
Item
Designation
Stocknumber
1
wire holding arbor
306.050.003
2
wire feed motor with 4-roller feed 140 W, 42V
454.140.023
wire feed roll 0.8 - 1.0 for 4-roller feed
454.010.024
wire feed roll 1.0 - 1.2 for 4-roller feed
454.012.025
wire feed roll 1.6, knurled type, 4-roller feed
454.016.026
wire feed roll, plain/ knurled, 4-roller feed
454.000.027
3
Rapid action coupling DN 5 - G ¼ I
355.014.007
PVC washer red
101.011.047
PVC washer blue
101.011.048
4
case top with clasp
713.623.001
5
case for wire feed unit
715.013.003
6
side panel for wire feed unit
715.011.021
7
Control box MS15-5 complete
851.015.010
8
central adapter complete
425.107.001
insulating flange for Binzel adapter
425.501.004
9
solenoid valve NW2,5 / 42V G1/8
465.018.009
Manometric switch Water 0,1 – 1 bar
444.166.002
10
Reed switch for creep-in function
705.011.004
11
flange for wire feed unit
715.011.009
mandrel for rotable wire feed unit support
715.054.007
12
case frame DVK 4.1 black
715.013.002
13
Rapid action coupling DN 5 - G ¼ I
355.014.007
14
Nut M12
D582 M12 V
15
castor roller, diam. 75 x 22 mm
301.075.007