6
4.0 Specifications for JET ProShop II
™
Fence
Fence
Stock number 725005
Side plate height 2-1/2 in. (64 mm)
Side plate length 33-1/4 in. (845 mm)
Fence width 3-1/8 in. (80 mm)
Body material steel
Side plate material Extruded aluminum
Head material Steel
Cross bar length 13-3/4 in. (350 mm)
Rails
30 in. Rip 52-in. Rip
Stock number 708483 708484
Material steel steel
Actual length, front & back rails 55 in. (140 cm) 77-1/4 in. (196 cm)
Actual length, guide rail 59-7/16 in. (151 cm) 81-3/4 in. (208 cm)
Table 1
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
To Next Page
Loading...
