12
STEP 4:
Mounting the gasket to the outlet of collector body.
Connecting the collector body and fan and motor assembly
by using sixteen 5/16” x 1” hex. head screws. Fasten the
screws tightly. (See FIG. 4)
(FIG.4)
STEP 5:
Connecting the upper bag support and hanger by using
four 1/4” x 1/2” hex. head bolts provided. Then, mounting
the upper bag support on the hole provided at the top of
collector body by using two 1/4” x 1/2” hex. head bolts
provided. (See FIG. 5)
(FIG. 5)
To Next Page
Loading...
