WARNING
Read and understand the entire contents of
this manual before attempting assembly or
operation of the dust collector!
Failure to comply may cause serious injury!
Unpacking
1. Remove all contents from the shipping
carton.
2. Report any damage to your distributor.
3. Do not discard any shipping material until
after the dust collector has been assembled
and is running properly.
Contents of the Shipping Cartons
1. Warranty Card
1. Owner's Manual
1. Adapter
1. Motor/Fan Assembly
1. Collector Bag
1. Bag Clamp
4. Casters & Hardware
Tools Required for Assembly
6"-8" Adjustable Wrench or 14mm Wrench.
Cross Point or Flat Head Screwdriver.
To Next Page
Loading...
