5
Specifications
Model Number ............................. HP-5A ................................... HP-15A .................................. HP-35A
Stock Number ............................ 331406 .................................... 331416 .................................. 331431
Capacity (ton) ...................................... 5 ........................................... 15 .......................................... 35
Ram Diameter (in.) ........................ 1-3/4 ....................................... 2-1/2 ............................................ 3
Piston Stroke (in.) ................................ 4 ....................................... 4-1/2 ...................................... 4-3/4
Screw Stroke (in.) ................................ 3 ....................................... 3-1/8 ............................................ 4
Work Table (in.) ...................... 19 x 5-1/2 ...........................24-3/4 x 7-1/2 ............................. 31 x 10-3/8
Lateral Movement (in.) ...................... NA .................................... 10-3/16 .......................................... 15
Vertical Travel (in.)........................18-3/4 .................................... 22-3/16 .................................... 22-1/4
Base Size (in.) ...................... 23-1/2 x 26 .........................33-7/8 x 29-1/2 ....................... 43-1/2 x 55-1/2
Height (in.) ...................................51-1/2 ........................................... 65 .......................................... 68
Net Weight (lbs.) ...............................154 ..........................................431 ........................................ 704
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier (Manufacturing) Inc., reserves the right to change specifications at
any time and without prior notice, without incurring obligations.
Assembly
1. Bolt the stand feet to the stand frame with the enclosed hardware.
2. Replace the hex filler plug (part #17 – HP-5A, part #8A – HP-15A, and part #8D – HP-35A) with the
enclosed vented plug.
Replacement Parts
To order parts or reach our service department, call 1-800-274-6848, Monday through Friday (see our
website for business hours, www.waltermeier.com). Having the Model Number and Serial Number of your
machine available when you call will allow us to serve you quickly and accurately.
To Next Page
Loading...
Need help?
General
