To Next PageTo Next PageWhy does the quill on my Jet JDP-12 return too slow or too fast?
The quill on your Jet Drill returning too slow or too fast indicates that the spring has improper tension. Adjust “Return Spring Tension”.
General| Type | Bench Drill Press |
|---|---|
| Motor Power | 3/4 HP |
| Number of Spindle Speeds | 5 |
| Spindle Taper | JT33 |
| Swing | 305mm |
Essential safety rules for operating the drill press, including personal protection and work area safety.
Covers user attention, tool usage, maintenance, and safety notices.
Steps for safely lifting and securing the head assembly onto the column.
Detailed steps for cleaning and installing the chuck and arbor into the spindle.
Explains proper grounding, 115V operation, and adapter use.
Guidance on periodic lubrication and safe, effective basic operation procedures.
Lists common problems, their probable causes, and recommended solutions for the drill press.
