Need help?Do you have a question about the Jet JMD-18 and is the answer not in the manual?
General| Motor Power | 3/4 HP |
|---|---|
| Drilling Capacity | 1-1/4" |
| Spindle Taper | MT-3 |
| Spindle Travel | 4-3/4" |
| Table Size | 14" |
| Weight | 363 lbs |
| Type | Drill |
| Overall Height | 1200 mm |
Details JET's one-year limited warranty for products, excluding misuse and neglect.
Information on ordering replacement parts and the 30-day warranty for purchased parts.
Instruction to retain dated sales receipts to validate warranty periods.
Essential safety rules for operating the mill/drill, including PPE and workspace.
Warning about chemical exposure from dust and recommended protective measures.
Lists all items included in the mill/drill package and accessory kit.
Instructions for unpacking the machine and listing the required tools for assembly.
Step-by-step guide for assembling the machine's handwheels and handles.
Procedures for safely installing the mill/drill, including lifting and leveling.
Guidance on daily lubrication of ball oilers and maintenance of spindle bearings.
Instructions for connecting the mill/drill to power, including voltage conversion and grounding.
Description of controls like handwheels, stops, locks, and depth adjustments.
Details on motor lock, head pivot lock, on-off switch, quill lock, and head elevation.
Guidance on safely operating the machine, including warnings.
Procedures for changing spindle speeds and replacing the arbor.
Procedure for adjusting gibs to compensate for wear and maintain table movement accuracy.
Instructions for using the power feed feature, including depth stop setup and operation.
Detailed parts lists for the JMD-15 head, table, base, and column assemblies.
Detailed parts lists for the JMD-18/18PFN head, table, base, and column assemblies.
Detailed parts list for the JMD-18PFN power feed assembly.
Wiring diagrams for the JMD-15 model at 115V and 230V.
Wiring diagram for the JMD-18/18PFN model at 230V.
To Next Page
