Jet JSSG-10 - Safety Warnings; General Operation Safety; Machine Use and Maintenance Safety

Slow Speed Wet Sharpener Accessories | 4
Stock No. 708019
KNIFE JIG
• Rests on the support arm and is used to
sharpen draw knives, pocket knives and
small cutlery up to 4" in length
Stock No. 708021
LONG KNIFE JIG
• Rests on the support arm and is used
to sharpenlarge knives and draw knives
over 4" in length
Stock No. 708017
STONE GRADER
• Dual surface Stone Grader dresses the wheel
for both ne and coarse sharpening
Stock No. 708018
DIAMOND TRUING TOOL
• Mounts on the support arm and is used to
true stone before and after use
Stock No. 708040
SUPPORT ARM EXTENSION
• Used in conjunction with the Support Arm,
creates a dual tool rest conguration allow-
ing for quick transition from sharpening to
honing
Stock No. 708039
SUPPORT ARM
• Mounts directly to the front and back of
the sharpener, can be used alone or in
conjunction with the wide assortment of
JET sharpening jigs
Stock No. 708031
AXE JIG
• Mounts on the support arm and is used to
sharpen axes and hatchets
Stock No. 708027
SIDE WHEEL GRINDING JIG
• Used in conjunction with the TR-1 tool rest
accessory to sharpen card scrapers
Stock No. 708043
LEATHER STROP WHEEL
• Removes burrs and polishes edges to
a razor sharpness. Use in conjunction
with honing compound