Jet JDP-15B - User Manual

JDP-15B-M/T
JDP-17-M/T
DRILL PRESS
Original:
GB
Operating Instructions
Translations:
D
Gebrauchsanleitung
F
Mode d´emploi
JPW (Tool) AG
Tämperlistrasse 5
CH-8117 Fällanden
Switzerland
Phone +41 44 806 47 48
Fax +41 44 806 47 58
www.jettools.com
M- 716100M/T, 716200M/T, 716300M/T 2016-09

Jet JDP-15B Specifications

General

Brand	Jet
Model	JDP-15B
Category	Power Tool
Language	English

Summary

Warranty

Warranty

Safety

Authorized Use

Defines the drill press's intended use and prohibited materials.

General Safety Notes

Provides essential safety guidelines for operation and maintenance.

Remaining Hazards

Machine Specifications

Technical Data

Lists detailed technical specifications and electrical data.

Transport and Start Up

Transport and Installation

Guides on safe transport and stable installation procedures.

Assembly

Step-by-step instructions for assembling the machine components.

Mains Connection

Instructions for connecting the machine to the power supply.

Starting Operation

How to start and stop the machine using its controls.

Machine Operation

Machine Operation

General procedures and checks before operating the drill press.

Setup and Adjustments

General Note

Removing the Chuck and Arbor

Adjusting the Depth Stop

Changing Spindle Speeds

Table Movements

Table Tilt Adjustment

Cross Laser Adjustment

Maintenance and Inspection

General Notes

Safety precautions for maintenance and cleaning.

Maintenance and Inspection

Regular cleaning, lubrication, and checks for machine longevity.

Trouble Shooting

Motor Doesnt Start

Troubleshooting steps for a motor that fails to start.

Chuck Will Not Stay on Spindle

Machine Vibration

Drill Bit Burns

Drill Leads Off

Laser Cross Not on Drill Centre

Laser Doesnt Work

Assembly Drawing

Assembly Drawing