Need help?Do you have a question about the Jet JDP-20MF and is the answer not in the manual?
General| Swing | 20 inches |
|---|---|
| Spindle Taper | MT3 |
| Base Size | 500 x 210 mm |
| Type | Floor |
| Table Tilt | 45° |
| Motor Power | 3/4 HP, 115/230V, 1 Ph |
Guidance on obtaining the latest product details and updates from WMH Tool Group.
Lists the tools necessary for the assembly of the drill press.
Steps to take before starting the assembly process, including checking parts and cleaning.
Instructions for assembling the main column structure onto the base of the drill press.
Details on how to attach the table bracket and its associated components to the column.
Instructions for threading and installing the column lock handle.
Step-by-step instructions for mounting the drill press table securely to the column.
Guide on cleaning and installing the drill chuck and arbor into the spindle.
Procedure for safely removing the drill chuck and arbor from the spindle.
How to set the depth stop for repetitive drilling operations at a precise depth.
Steps to adjust belt positions for changing the spindle speed for different materials.
Guide for installing a light bulb into the drill press's work light socket.
Detailed steps for tilting the drill press table to a specific angle using the scale.
Proper method for inserting and securing drill bits into the chuck.
Techniques for safely positioning workpieces and using the vise for stable drilling.
Fundamental steps for drilling, including feed rate and RPM considerations.
Recommended lubrication points and frequency for maintaining the drill press.
Instructions for connecting and operating the drill press on a 115V power supply.
Steps to reconfigure the drill press for 230V power supply.
Essential safety information on grounding the drill press to prevent electric shock.
Recommendations for selecting and using appropriate extension cords for the drill press.
Wiring diagram detailing the electrical connections for 115-volt operation.
Wiring diagram detailing the electrical connections for 230-volt operation.
To Next Page
