Jet VBS-2012 - User Manual

Operating Instructions and Parts Manual
20-inch Metalworking Band Saw
Model VBS-2012
WALTER MEIER (Manufacturing) Inc.
427 New Sanford Road
LaVergne, Tennessee 37086 Part No. M-414482
Ph.: 800-274-6848 Revision G1 04/2013
www.waltermeier.com Copyright © 2013 Walter Meier (Manufacturing) Inc.

Summary

Warranty and Service

Warranty Coverage Details

Covers what is, who is, period, and exclusions of the product warranty.

Service and Legal Information

Details how to get service, state law rights, and warranty limitations.

Safety Warnings

General Operating Safety Precautions

Essential safety guidelines for operating the band saw safely.

About This Manual

Manual Purpose and Overview

Explains the manual's purpose, content, and provides contact information.

Specifications

Technical Specifications Overview

Lists key technical data for the VBS-2012 band saw.

Setup and Installation

Uncrating and Assembly Procedures

Steps for unpacking and assembling the band saw components.

Electrical Connections

Voltage Configuration and Testing

Guidance on changing voltage settings and performing a test run.

Controls

Control Panel and Key Controls

Identifies and explains the function of all machine controls.

Adjustments

Blade Tensioning and Tracking

Procedures for setting blade tension and adjusting its tracking.

Blade Guide and Top Guide Setup

Alignment of blade guides and positioning of the top guide.

Blade Replacement and Lamp Bulb

Steps for changing saw blades and replacing the work lamp bulb.

Blade Selection

Blade Material and Tooth Geometry

Covers blade composition, tooth shape, set, gage, kerf, and width.

Blade Breakage

Causes and Prevention of Breakage

Identifies common reasons for blade failure and how to avoid them.

Welder Operation

Blade Preparation for Welding

Covers shearing the blade and removing teeth for the weld area.

Welding and Annealing Process

Details the process of welding the blade and annealing it for proper temper.

Post-Weld Grinding and Cleaning

Instructions for grinding the weld, secondary annealing, and welder clean-up.

Band Saw Operation

Blade Break-in and Speed Settings

Procedures for new blade break-in and adjusting blade speed.

Cutting Efficiency Evaluation

Methods to assess optimal cutting performance.

Maintenance

Lubrication Schedule

Details the recommended lubrication intervals for machine parts.

Troubleshooting

Operating and Mechanical Problems

Solutions for common operational and mechanical issues.

Electrical and Welder Problems

Troubleshooting guides for electrical malfunctions and welder issues.

Welded Blade Inspection

How to inspect welded blade joints for defects.

Speed and Pitch Chart

Material Cutting Recommendations

Provides recommended sawing speeds and tooth pitch for various materials.

Typical Band Saw Operations

Illustrated Cutting Techniques

Visual guide showing various cutting methods.

Replacement Parts

Exploded Views and Parts List

Illustrated diagrams and a comprehensive list of all replacement parts.

Electrical Connections

Wiring Diagrams and Settings

Provides the electrical schematic and configuration for voltage conversion.

Jet VBS-2012 Specifications

General

Brand	Jet
Model	VBS-2012
Category	Saw
Language	English