VOLT™ V2 QUICK START GUIDE
12
CHANGING TO A CAMPAG OR XD-R FREEHUB BODY
The stock free hub can be removed with or without the cassette installed. If you choose to remove the cassette
prior to removing the free hub, follow the instructions on previous page.
Remove the Adaptor C nut with the 17mm
wrench. Set this aside to use again.
Remove the
retaining ring
from the
Campagnolo
free hub
Remove the existing free hub by sliding off.
4
If a spacer is supplied with new Free hub body, install this now.
1
3
2
To Next Page
Loading...