engine models. The possible methods are:
• SEQUENCE, default, with the throttle trim at maximum,
start the engine by switching the AUX control to the center
START/RUN position and then moving the throttle stick to
maximum. If in single channel mode, start the engine by
moving the throttle trim to maximum and then moving the
throttle stick to maximum.
• THROTTLE MAX, with the throttle trim at maximum and
the throttle stick at maximum, start the engine by switching
the AUX control to the center START/RUN position. If in
single channel mode, the turbine will be started as soon as
the throttle stick is set higher than 95% of maximum.
• IMMEDIATE, with the throttle trim at maximum, start the
engine by switching the AUX control to the center
START/RUN position. If in single channel mode, start the
engine by moving the throttle trim to maximum.
Page 52/74
To Next Page
Loading...
