EasyManua.ls Logo

JetCat P60 - Shutdown and Slow Down States

JetCat P60
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Slow Down
During this state, the fuel shut-off valve is closed and the fuel pump is
stopped.
The green OK LED blinks, indicating Slow Down
This condition will continue, until all of the following parameters are met:
Turbine speed less than 800 RPM
EGT is less that 100 degrees C.
The AUX switch is moved to the Off position and throttle trim is
moved to the minimum position
Once these conditions are met, turbine proceeds to Off.
Auto Off The AUX switch placed in the Auto Off position.
Turbine automatically adjusts to 55,000 RPM and remains at that RPM
for approximately six (6) seconds, before transition to the next state
(Slow Down).
Run (reg.)
Turbine in the normal running state; the throttle stick will regulate turbine
thrust.
During this operant condition, the green OK LED will illuminate,
indicating that pilot has control.
RUN (regulated) continues, until the turbine is switched off.
Speed
Control
Speed Control mode -- only active when the air speed sensor is
connected. Regulates model flight speed.
Page 41/74

Table of Contents

Related product manuals