Jetfire J90A - User Manual

OPERATING & MAINTENANCE
MANUAL
INDUSTRIAL DIRECT GAS FIRED
PROPANE HEATERS
J8 J15 J25 J25A J33 J33A
J50A J70A J90A J90SA
THIS HEATER IS APPROVED FOR INDUSTRIAL USE ONLY
Made By:
Spitwater Australia Pty Ltd
953 Metry St
North Albury , NSW , Australia
WARNING:
FAILURE TO FOLLOW OPERATING, SAFETY AND MAINTENANCE
INSTRUCTIONS LISTED IN THIS MANUAL RELEASES THE MANUFACTURER
FROM ANY RESPONSIBILITY FOR ACCIDENTS OR DAMAGES TO BOTH
HUMANS AND OBJECTS AND MAY RENDER ANY WARRANTY VOID

Summary

Safety Warning

Introduction

Key Safety Precautions

Essential safety instructions and precautions for operating the heater.

Electrical Supply Specifications

Details the required electrical supply for the heaters.

Gas Supply Information

Cylinder Size and Quantity

Recommendations for gas cylinder types and quantities based on heater model.

Installation and Operation

Installation Steps

Procedure for connecting gas supply, power, and performing initial checks.

Operating Modes

Instructions for manual, automatic, and summer ventilation operation.

Maintenance and Troubleshooting

Troubleshooting Guide

Guide to identify common faults and their potential causes.

Fault Correction

Procedures for correcting identified faults, recommending qualified technicians.

Maintenance Procedures

General and Burner Service

Covers general cleaning, burner service, and component checks.

System Maintenance Checks

Includes gas supply and electrical system checks for proper function.

Component Legend

Jetfire J90A Specifications

General

Brand	Jetfire
Model	J90A
Category	Heater
Language	English