EasyManua.ls Logo

Jetfire J8 User Manual

Jetfire J8
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATING & MAINTENANCE
MANUAL
INDUSTRIAL DIRECT GAS FIRED
PROPANE HEATERS
J8 J15 J25 J25A J33 J33A
J50A J70A J90A J90SA
THIS HEATER IS APPROVED FOR INDUSTRIAL USE ONLY
Made By:
Spitwater Australia Pty Ltd
953 Metry St
North Albury , NSW , Australia
WARNING:
FAILURE TO FOLLOW OPERATING, SAFETY AND MAINTENANCE
INSTRUCTIONS LISTED IN THIS MANUAL RELEASES THE MANUFACTURER
FROM ANY RESPONSIBILITY FOR ACCIDENTS OR DAMAGES TO BOTH
HUMANS AND OBJECTS AND MAY RENDER ANY WARRANTY VOID
Question and Answer IconNeed help?

Do you have a question about the Jetfire J8 and is the answer not in the manual?

Jetfire J8 Specifications

General IconGeneral
BrandJetfire
ModelJ8
CategoryHeater
LanguageEnglish

Summary

Technical Data

Introduction to Jetfire Heaters

Manual Purpose and User Responsibility

Overview of the Jetfire range, purpose of the manual, and user responsibilities.

Important Safety Instructions & Precautions

Operational Safety Guidelines

Critical safety measures for operating the heater, covering usage, ventilation, and clearances.

Electricity Supply Requirements

Electrical Connection Specifications

Details on the required electrical supply voltage, frequency, and earthing.

Gas Supply and Cylinder Management

Gas Cylinder Recommendations

Recommended gas cylinder sizes for different models to prevent freezing.

Installation and Operating Instructions

General Installation Steps

Step-by-step guide for installing all heater models.

Manual Model Operation

Procedures for starting, using, and stopping manual models.

Automatic Model Operation

Procedures for starting, using, and stopping automatic models.

Summer Ventilation Mode

Instructions for using the heater in summer ventilation mode.

Maintenance and Fault Finding

Troubleshooting Guide

Identifies common faults and their causes for automatic and manual models.

Maintenance Procedures

General Maintenance Steps

General steps for maintenance, including disconnecting power and gas.

Burner Service and Cleaning

Procedures for servicing the burner, including gas jet and head cleaning.

Gas Supply Maintenance Checks

Checks for gas supply hose tightness and pipe connections.

Electrical System Checks

Checks for motor bolts, fan screws, and electrical connections.

Related product manuals