www.modellmarkt24.ch
computer radio control system
3.1 Installation in the model
Always place the receiver in the model parallel to the flight axes and
ideally as close as possible to the center of gravity (especially for
multicopters). This is important for the proper functioning of
stabilization and its correct response. It is important that the
mounting of the receiver is made in such a way that the vibrations
from the model are minimized and that the fixation is guaranteed at
the right place. We recommend using a double-sided adhesive tape
for this purpose.
3 Installation
8
EN
JETI model s.r.o.
Lomená 1530, 742 58 Příbor
Czech Republic - EU
www.jetimodel.com
www.jetimodel.de
info@jetimodel.cz
Duplex-System EX:
• Transmitter modules
• Receivers
• Telemetric sensors
• Compatible accessories
• Display units
Serial number:
Carefully save this serial number!
www.modellmarkt24.ch
To Next Page
Loading...
Need help?
General
